[PATCH v3 4/4] serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array

[James Clark]

Now that devm_krealloc_array is available, add a comment justifying not
changing this occurrence to avoid any future auto fixups.

Link: https://lore.kernel.org/all/20230318173402.20a4f60d@jic23-huawei/
Signed-off-by: James Clark <james.clark@xxxxxxx>
---
 drivers/tty/serial/qcom_geni_serial.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 28fbc927a546..8ae1fb7c2636 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1055,6 +1055,11 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
 
 	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
+		/*
+		 * Use krealloc rather than krealloc_array because rx_buf is
+		 * accessed as 1 byte entries as well as 4 byte entries so it's
+		 * not necessarily an array.
+		 */
 		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
 					     port->rx_fifo_depth * sizeof(u32),
 					     GFP_KERNEL);
-- 
2.34.1