Re: [PATCH v2] media: i2c: ov5640: Implement get_mbus_config

[Jacopo Mondi]

Hi Philipp

On Mon, Mar 20, 2023 at 12:26:26PM +0100, Philipp Zabel wrote:
> On Mo, 2023-03-20 at 11:55 +0200, Laurent Pinchart wrote:
> > On Mon, Mar 20, 2023 at 11:37:33AM +0200, Sakari Ailus wrote:
> > > Hi Laurent,
> > >
> > > On Mon, Mar 20, 2023 at 11:26:02AM +0200, Laurent Pinchart wrote:
> > > > In a (simplified) nutshell,
> > > >
> > > > ---------+     +----------+     +---------+     +-----+     +-----+
> > > > > Camera | --> | CSI-2 RX | --> | CSI2IPU | --> | Mux | --> | IPU |
> > > > > Sensor |     |          |     | Gasket  |     |     |     |     |
> > > > ---------+     +----------+     +---------+     +-----+     +-----+
> > >
> > > Thank you, this is helpful.
> > >
> > > I suppose the mux here at least won't actively do anything to the data. So
> > > presumably its endpoint won't contain the active configuration, but its
> > > superset.
> > >
> > > >
> > > > All those blocks, except for the gasket, have a node in DT.
> > > >
> > > > The IPU driver needs to know the number of CSI-2 data lanes, which is
> > > > encoded in the data-lanes DT property present in both the sensor output
> > > > endpoint and the CSI-2 RX input endpoint, but not the other endpoints in
> > > > the pipeline.
> > >
> > > This doesn't yet explain why the sensor would need to implement
> > > get_mbus_config if its bus configuration remains constant.
> >
> > If I recall correctly, the IPU driver calls .g_mbus_config() on the
> > camera sensor to get the number of lanes, as it can't get it from its
> > own endpoint. That's a hack, and as Jacopo proposed, calling
> > .g_mbus_config() on the CSI-2 RX would be better, as the CSI-2 RX driver
> > can then get the value from its own endpoint, without requiring all
> > sensor drivers to implement .g_mbus_config().
>
> The IPU driver doesn't call get_mbus_config, the CSI-2 RX driver does

Am I confusing IPU CSI with CSI-2 ?
https://elixir.bootlin.com/linux/latest/source/drivers/staging/media/imx/imx-media-csi.c#L211

> (csi2_get_active_lanes in imx6-mipi-csi2.c). It could just fall back to
> looking at its own endpoint if the upstream driver does not implement
> get_mbus_config.
>
> Of course that will only help if the DT contains this information and
> all connected lanes are active.

We should assume DTs are correct, otherwise we're screwed most of the
times...

>
> regards
> Philipp