Re: [RFC PATCH v1] mtd: rawnand: meson: invalidate cache on polling ECC bit

From: Miquel Raynal
Date: Mon Mar 20 2023 - 07:01:13 EST


Hi Dmitry,

ddrokosov@xxxxxxxxxxxxxx wrote on Mon, 20 Mar 2023 13:43:14 +0300:

> Hello guys!
>
> Was it applied to some nand 'prepare-for-merge' release branch?

Not yet, I'll apply it this week in mtd/fixes, you'll be noticed.

Thanks,
Miquèl

> On Mon, Mar 13, 2023 at 12:23:12PM +0100, Neil Armstrong wrote:
> > On 13/03/2023 12:18, Miquel Raynal wrote:
> > > Hi Arseniy,
> > >
> > > avkrasnov@xxxxxxxxxxxxxx wrote on Mon, 13 Mar 2023 10:36:11 +0300:
> > >
> > > > Hello,
> > > >
> > > > we reproduced this problem on one of our boards. It triggers very rare
> > > > when 'usleep_range()' is present, but when sleeping is removed - it fires
> > > > always. I suppose problem is with caching, as 'info_buf' memory is mapped by
> > > > 'dma_map_single()'.
> > >
> > > The fix looks really legitimate, indeed I get that the usleep_range()
> > > might make it work most of the time but not always. Having this bit in
> > > a DMA buf area is a bit strange. Well, the fix LGTM anyway.
> >
> > Yep it looks legitimate!
> >
> > LGTM
> >
> >
> > Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> >
> > >
> > > >
> > > > Thanks, Arseniy
> > > >
> > > > On 13.03.2023 10:32, Arseniy Krasnov wrote:
> > > > > 'info_buf' memory is cached and driver polls ECC bit in it. This bit
> > > > > is set by the NAND controller. If 'usleep_range()' returns before device
> > > > > sets this bit, 'info_buf' will be cached and driver won't see update of
> > > > > this bit and will loop forever.
> > > > >
> > > > > Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
> > > > > Signed-off-by: Arseniy Krasnov <AVKrasnov@xxxxxxxxxxxxxx>
> > > > > ---
> > > > > drivers/mtd/nand/raw/meson_nand.c | 8 +++++++-
> > > > > 1 file changed, 7 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > > > index 5ee01231ac4c..2c05c08a0eaf 100644
> > > > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > > > @@ -176,6 +176,7 @@ struct meson_nfc {
> > > > > dma_addr_t daddr;
> > > > > dma_addr_t iaddr;
> > > > > + u32 info_bytes;
> > > > > unsigned long assigned_cs;
> > > > > };
> > > > > @@ -503,6 +504,7 @@ static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> > > > > nfc->daddr, datalen, dir);
> > > > > return ret;
> > > > > }
> > > > > + nfc->info_bytes = infolen;
> > > > > cmd = GENCMDIADDRL(NFC_CMD_AIL, nfc->iaddr);
> > > > > writel(cmd, nfc->reg_base + NFC_REG_CMD);
> > > > > @@ -520,8 +522,10 @@ static void meson_nfc_dma_buffer_release(struct nand_chip *nand,
> > > > > struct meson_nfc *nfc = nand_get_controller_data(nand);
> > > > > dma_unmap_single(nfc->dev, nfc->daddr, datalen, dir);
> > > > > - if (infolen)
> > > > > + if (infolen) {
> > > > > dma_unmap_single(nfc->dev, nfc->iaddr, infolen, dir);
> > > > > + nfc->info_bytes = 0;
> > > > > + }
> > > > > }
> > > > > static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
> > > > > @@ -710,6 +714,8 @@ static void meson_nfc_check_ecc_pages_valid(struct meson_nfc *nfc,
> > > > > usleep_range(10, 15);
> > > > > /* info is updated by nfc dma engine*/
> > > > > smp_rmb();
> > > > > + dma_sync_single_for_cpu(nfc->dev, nfc->iaddr, nfc->info_bytes,
> > > > > + DMA_FROM_DEVICE);
> > > > > ret = *info & ECC_COMPLETE;
> > > > > } while (!ret);
> > > > > }
> > >
> > >
> > > Thanks,
> > > Miquèl
> >
>