Re: [PATCH 05/14] arm64: dts: qcom: sa8775p: add support for the on-board PMICs

[Bartosz Golaszewski]

On Tue, Mar 14, 2023 at 9:22 PM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> >
> > Add a new .dtsi file for sa8775p PMICs and add the four PMICs interfaced
> > to the SoC via SPMI.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 37 +++++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > new file mode 100644
> > index 000000000000..77e2515a7ab9
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > @@ -0,0 +1,37 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) 2023, Linaro Limited
> > + */
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/spmi/spmi.h>
> > +
> > +&spmi_bus {
> > +     pmk8775_0: pmic@0 {
> pmk8775..
>
> > +             compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
> ..or pmm8654au?
>

Honestly, I got inspired by this bit from sc8280xp-pmics.dtsi:

 54 &spmi_bus {
 55         pmk8280: pmic@0 {
 56                 compatible = "qcom,pmk8350", "qcom,spmi-pmic";
 57                 reg = <0x0 SPMI_USID>;
 58                 #address-cells = <1>;
 59                 #size-cells = <0>;

Where the label seems to follow the SoC's numbering. Do you think it
would be better to consistently use the pmic's name?

Bartosz

> Konrad
> > +             reg = <0x0 SPMI_USID>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +     };
> > +
> > +     pmk8775_1: pmic@2 {
> > +             compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
> > +             reg = <0x2 SPMI_USID>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +     };
> > +
> > +     pmk8775_2: pmic@4 {
> > +             compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
> > +             reg = <0x4 SPMI_USID>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +     };
> > +
> > +     pmk8775_3: pmic@6 {
> > +             compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
> > +             reg = <0x6 SPMI_USID>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +     };
> > +};