Re: [PATCH v2] media: i2c: ov5640: Implement get_mbus_config

[Laurent Pinchart]

On Mon, Mar 20, 2023 at 11:37:33AM +0200, Sakari Ailus wrote:
> Hi Laurent,
> 
> On Mon, Mar 20, 2023 at 11:26:02AM +0200, Laurent Pinchart wrote:
> > In a (simplified) nutshell,
> > 
> > ---------+     +----------+     +---------+     +-----+     +-----+
> > | Camera | --> | CSI-2 RX | --> | CSI2IPU | --> | Mux | --> | IPU |
> > | Sensor |     |          |     | Gasket  |     |     |     |     |
> > ---------+     +----------+     +---------+     +-----+     +-----+
> 
> Thank you, this is helpful.
> 
> I suppose the mux here at least won't actively do anything to the data. So
> presumably its endpoint won't contain the active configuration, but its
> superset.
> 
> > 
> > All those blocks, except for the gasket, have a node in DT.
> > 
> > The IPU driver needs to know the number of CSI-2 data lanes, which is
> > encoded in the data-lanes DT property present in both the sensor output
> > endpoint and the CSI-2 RX input endpoint, but not the other endpoints in
> > the pipeline.
> 
> This doesn't yet explain why the sensor would need to implement
> get_mbus_config if its bus configuration remains constant.

If I recall correctly, the IPU driver calls .g_mbus_config() on the
camera sensor to get the number of lanes, as it can't get it from its
own endpoint. That's a hack, and as Jacopo proposed, calling
.g_mbus_config() on the CSI-2 RX would be better, as the CSI-2 RX driver
can then get the value from its own endpoint, without requiring all
sensor drivers to implement .g_mbus_config().

> I suppose those blocks in between would probably need something to convey
> their active configuration from upstream sub-devices.

-- 
Regards,

Laurent Pinchart