Re: [PATCH v2] media: i2c: ov5640: Implement get_mbus_config

[Laurent Pinchart]

On Mon, Mar 20, 2023 at 11:00:36AM +0200, Sakari Ailus wrote:
> On Mon, Mar 20, 2023 at 09:48:44AM +0100, Jacopo Mondi wrote:
> > On Tue, Mar 14, 2023 at 01:59:06PM +0100, Francesco Dolcini wrote:
> > > On Tue, Mar 14, 2023 at 02:45:53PM +0200, Sakari Ailus wrote:
> > > > On Tue, Mar 14, 2023 at 01:32:16PM +0100, Francesco Dolcini wrote:
> > > > > On Tue, Mar 14, 2023 at 02:13:46PM +0200, Sakari Ailus wrote:
> > > > > > On Mon, Mar 06, 2023 at 07:36:49AM +0100, Marcel Ziswiler wrote:
> > > > > > > From: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
> > > > > > >
> > > > > > > Implement the introduced get_mbus_config operation to report the
> > > > > > > config of the MIPI CSI-2, BT.656 and Parallel interface.
> > > > > > >
> > > > > > > Signed-off-by: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
> > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > > > > >
> > > > > > What's the reasoning for this patch?
> > > > >
> > > > > Without this it's not possible to use it on i.MX6,
> > > > > drivers/staging/media/imx/imx6-mipi-csi2.c requires it, some more
> > > > > details from Jacopo here [0].
> > > > >
> > > > > Everything used to work fine up to v5.18, after that kernel version
> > > > > various changes broke it [1][2] (I assume you are pretty much aware of
> > > > > the history here, you commented on a few emails).
> > > > >
> > > > > [0] https://lore.kernel.org/all/20230128100611.7ulsfqqqgscg54gy@uno.localdomain/
> > > > > [1] https://lore.kernel.org/all/081cc2d3-1f3a-6c14-6dc7-53f976be7b2b@xxxxxxxxx/
> > > > > [2] https://lore.kernel.org/all/cacfe146-101b-35b3-5f66-1a1cabfd342f@xxxxxxxxx/
> > > > >
> > > > > > Drivers that don't have e.g. dynamic lane configuration shouldn't need to
> > > > > > implement get_mbus_config.
> > > >
> > > > Not even for staging drivers. The driver should be fixed to get that
> > > > information from the endpoint instead.
> > >
> > > This seems exactly the opposite of what commit
> > > 7318abface48 ("media: imx: Use get_mbus_config instead of parsing upstream DT endpoints")
> > > did.
> > >
> > > Given that I am somehow confused, but I am not that familiar with this
> > > subsystem, so I guess this is expected :-). Can someone provide some
> > > additional hint here?
> > >
> > 
> > As per my understanding, the i.MX6 IPU CSI driver connects to the
> > CSI-2 receiver and/or two video muxes. One figure's worth a thousands
> > words: "Figure 19-1. CSI2IPU gasket connectivity" of the IMX6DQRM TRM.
> 
> I don't have that document.

https://www.nxp.com/webapp/Download?colCode=IMX6DQRM

You'll need a user account on nxp.com though.

> > So the local endpoint might not provide the required information on
> > the bus configuration as it connects to a video-mux.
> > 
> > That's why the imx_media_pipeline_subdev() helper is used in
> > csi_get_upstream_mbus_config().
> > 
> > My gut feeling is that it would be better to always call
> > get_mbus_config() on the next subdev (the mux or the CSI-2 rx) and
> > there parse the local endpoint as it's the mux or the CSI-2 rx that
> > connect to the actual source.
> 
> Isn't this still a different endpoint in DT? I understand you have a single
> pad with two links?

In a (simplified) nutshell,

---------+     +----------+     +---------+     +-----+     +-----+
| Camera | --> | CSI-2 RX | --> | CSI2IPU | --> | Mux | --> | IPU |
| Sensor |     |          |     | Gasket  |     |     |     |     |
---------+     +----------+     +---------+     +-----+     +-----+

All those blocks, except for the gasket, have a node in DT.

The IPU driver needs to know the number of CSI-2 data lanes, which is
encoded in the data-lanes DT property present in both the sensor output
endpoint and the CSI-2 RX input endpoint, but not the other endpoints in
the pipeline.

-- 
Regards,

Laurent Pinchart