Re: [PATCH] arm64/arm: dts: rockchip: Fix DSI node names

[Johan Jonker]

On 3/19/23 18:41, Rob Herring wrote:
> DSI bus/controller nodes should be named 'dsi' rather than 'mipi'.

There's already a serie that does that.
Lack of communication becomes common. 
More thing must be fixed to comply then this patch alone.

[PATCH v6 09/17] ARM: dts: rockchip: rk3288: fix dsi node
https://lore.kernel.org/linux-rockchip/f3edcbff-4aef-1d24-8d65-e519c9451cda@xxxxxxxxx/

[PATCH v6 15/17] arm64: dts: rockchip: rk3399: fix dp node
https://lore.kernel.org/linux-rockchip/f6008819-db9b-0944-3f5b-5522b7cd8a8d@xxxxxxxxx/

> 
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/rk3288.dtsi            | 2 +-
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 2ca76b69add7..d401b850583c 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -1114,7 +1114,7 @@ vopl_mmu: iommu@ff940300 {
>  		status = "disabled";
>  	};
>  
> -	mipi_dsi: mipi@ff960000 {
> +	mipi_dsi: dsi@ff960000 {
>  		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
>  		reg = <0x0 0xff960000 0x0 0x4000>;
>  		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 1881b4b71f91..e44e1c40c0ba 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1954,7 +1954,7 @@ hdmi_in_vopl: endpoint@1 {
>  		};
>  	};
>  
> -	mipi_dsi: mipi@ff960000 {
> +	mipi_dsi: dsi@ff960000 {
>  		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
>  		reg = <0x0 0xff960000 0x0 0x8000>;
>  		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
> @@ -1990,7 +1990,7 @@ mipi_in_vopl: endpoint@1 {
>  		};
>  	};
>  
> -	mipi_dsi1: mipi@ff968000 {
> +	mipi_dsi1: dsi@ff968000 {
>  		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
>  		reg = <0x0 0xff968000 0x0 0x8000>;
>  		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;