Re: [RFC PATCH v1] usb/phy add sprd ums512 usbphy
From: Cixi Geng
Date: Sat Mar 18 2023 - 11:37:52 EST
On Mon, 2023-03-13 at 17:11 +0800, Baolin Wang wrote:
>
>
> On 3/13/2023 1:14 AM, Cixi Geng wrote:
> > From: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> >
> > This driver is support USB2 phy for Spreadtrum UMS512 SOC's,
> >
> > Signed-off-by: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> > ---
> > drivers/usb/phy/Kconfig | 10 +
> > drivers/usb/phy/Makefile | 1 +
> > drivers/usb/phy/phy-sprd-ums512.c | 511
> > ++++++++++++++++++++++++++++++
> > drivers/usb/phy/phy-sprd-ums512.h | 39 +++
> > 4 files changed, 561 insertions(+)
> > create mode 100644 drivers/usb/phy/phy-sprd-ums512.c
> > create mode 100644 drivers/usb/phy/phy-sprd-ums512.h
> >
> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> > index 5f629d7cad64..fa5564e6f3a3 100644
> > --- a/drivers/usb/phy/Kconfig
> > +++ b/drivers/usb/phy/Kconfig
> > @@ -158,6 +158,16 @@ config USB_TEGRA_PHY
> > This driver provides PHY support for the USB controllers
> > found
> > on NVIDIA Tegra SoC's.
> >
> > +config USB_SPRD_UMS512_PHY
> > + tristate "Spreadtrum ums512 USB2 PHY Driver"
> > + depends on ARCH_SPRD || COMPILE_TEST
> > + select USB_PHY
> > + select EXTCON_USB_GPIO
> > + help
> > + Enable this to support the SPRD ums512 USB2 PHY that is
> > part of SOC.
> > + This driver takes care of all the PHY functionality,
> > normally paired with
> > + DesignWare USB20 (DRD) Controller.
> > +
> > config USB_ULPI
> > bool "Generic ULPI Transceiver Driver"
> > depends on ARM || ARM64 || COMPILE_TEST
> > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> > index e5d619b4d8f6..ce45ee0f12a8 100644
> > --- a/drivers/usb/phy/Makefile
> > +++ b/drivers/usb/phy/Makefile
> > @@ -22,4 +22,5 @@ obj-$(CONFIG_USB_MV_OTG) += phy-mv-
> > usb.o
> > obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
> > obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
> > obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-
> > viewport.o
> > +obj-$(CONFIG_USB_SPRD_UMS512_PHY) += phy-sprd-ums512.o
> > obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
> > diff --git a/drivers/usb/phy/phy-sprd-ums512.c
> > b/drivers/usb/phy/phy-sprd-ums512.c
> > new file mode 100644
> > index 000000000000..025f45e8d509
> > --- /dev/null
> > +++ b/drivers/usb/phy/phy-sprd-ums512.c
> > @@ -0,0 +1,511 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for Unisoc USB PHY driver
> > + *
> > + * Copyright (C) 2023 Unisoc Inc.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/usb/otg.h>
> > +#include <linux/usb/phy.h>
> > +#include <uapi/linux/usb/charger.h>
> > +
> > +#include "phy-sprd-ums512.h"
> > +
> > +struct sprd_hsphy {
> > + struct device *dev;
> > + struct usb_phy phy;
> > + struct regulator *vdd;
> > + struct regmap *hsphy_glb;
> > + struct regmap *ana_g2;
> > + struct regmap *pmic;
> > + u32 vdd_vol;
> > + atomic_t reset;
> > + atomic_t inited;
> > + bool is_host;
> > +};
> > +
> > +#define TUNEHSAMP_2_6MA (3 << 25)
> > +#define TFREGRES_TUNE_VALUE (0x14 << 19)
> > +#define SC2730_CHARGE_STATUS 0x1b9c
> > +#define BIT_CHG_DET_DONE BIT(11)
> > +#define BIT_SDP_INT BIT(7)
> > +#define BIT_DCP_INT BIT(6)
> > +#define BIT_CDP_INT BIT(5)
> > +
> > +static enum usb_charger_type sc27xx_charger_detect(struct regmap
> > *regmap)
> > +{
> > + enum usb_charger_type type;
> > + u32 status = 0, val;
> > + int ret, cnt = 10;
> > +
> > + do {
> > + ret = regmap_read(regmap, SC2730_CHARGE_STATUS,
> > &val);
> > + if (ret)
> > + return UNKNOWN_TYPE;
> > +
> > + if (val & BIT_CHG_DET_DONE) {
> > + status = val & (BIT_CDP_INT | BIT_DCP_INT |
> > BIT_SDP_INT);
> > + break;
> > + }
> > +
> > + msleep(200);
> > + } while (--cnt > 0);
> > +
> > + switch (status) {
> > + case BIT_CDP_INT:
> > + type = CDP_TYPE;
> > + break;
> > + case BIT_DCP_INT:
> > + type = DCP_TYPE;
> > + break;
> > + case BIT_SDP_INT:
> > + type = SDP_TYPE;
> > + break;
> > + default:
> > + type = UNKNOWN_TYPE;
> > + }
> > +
> > + return type;
> > +}
>
> Please do not add duplicate code, and use the
> sprd_pmic_detect_charger_type() instead, which had been exported in
> the
> mainline.
ok, I will remove this next patchset.
>
> > +
> > +static inline void sprd_hsphy_enable(struct sprd_hsphy *sprd_phy)
> > +{
> > + u32 reg, msk;
> > +
> > + /* enable usb module */
> > + reg = msk = (MASK_AON_APB_OTG_UTMI_EB |
> > MASK_AON_APB_ANA_EB);
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_APB_EB1, msk, reg);
> > + reg = msk = MASK_AON_APB_CGM_OTG_REF_EN |
> > + MASK_AON_APB_CGM_DPHY_REF_EN;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_CGM_REG1, msk, reg);
> > +}
> > +
> > +static inline void sprd_hsphy_power_down(struct sprd_hsphy
> > *sprd_phy)
> > +{
> > + u32 reg, msk;
> > +
> > + /* usb power down */
> > + reg = msk = (MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L |
> > + MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S);
> > + regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL, msk,
> > reg);
> > +}
> > +
> > +static inline void sprd_hsphy_reset_core(struct sprd_hsphy
> > *sprd_phy)
> > +{
> > + u32 reg, msk;
> > +
> > + /* Reset PHY */
> > + reg = msk = MASK_AON_APB_OTG_PHY_SOFT_RST |
> > MASK_AON_APB_OTG_UTMI_SOFT_RST;
> > +
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_APB_RST1, msk, reg);
> > + /* USB PHY reset need to delay 20ms~30ms */
> > + usleep_range(20000, 30000);
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_APB_RST1, msk, 0);
> > +}
> > +
> > +static int sprd_hostphy_set(struct usb_phy *u_phy, int on)
> > +{
> > + struct sprd_hsphy *sprd_phy = container_of(u_phy, struct
> > sprd_hsphy, phy);
> > + u32 reg, msk;
> > + int ret = 0;
> > +
> > + if (on) {
> > + msk = MASK_AON_APB_USB2_PHY_IDDIG;
> > + ret |= regmap_update_bits(sprd_phy->hsphy_glb,
> > + REG_AON_APB_OTG_PHY_CTRL, msk, 0);
> > +
> > + msk =
> > MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN |
> > + MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20
> > _DPPULLDOWN;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0,
> > + msk, msk);
> > +
> > + msk =
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN |
> > + MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLD
> > OWN;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 2,
> > + msk, msk);
> > +
> > + reg = 0x200;
> > + msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 1,
> > + msk, reg);
> > + sprd_phy->is_host = true;
> > + } else {
> > + reg = msk = MASK_AON_APB_USB2_PHY_IDDIG;
> > + ret |= regmap_update_bits(sprd_phy->hsphy_glb,
> > + REG_AON_APB_OTG_PHY_CTRL, msk, reg);
> > +
> > + msk =
> > MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN |
> > + MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20
> > _DPPULLDOWN;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0,
> > + msk, msk);
> > +
> > + msk =
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN |
> > + MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLD
> > OWN;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 2,
> > + msk, 0);
> > +
> > + msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED;
> > + ret |= regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 1,
> > + msk, 0);
> > + sprd_phy->is_host = false;
> > + }
> > + return ret;
> > +}
> > +
> > +static int sprd_hsphy_init(struct usb_phy *u_phy)
> > +{
> > + struct sprd_hsphy *sprd_phy = container_of(u_phy, struct
> > sprd_hsphy, phy);
> > + u32 reg, msk;
> > + int ret;
> > +
> > + if (atomic_read(&sprd_phy->inited)) {
> > + dev_dbg(u_phy->dev, "%s is already inited!\n",
> > __func__);
> > + return 0;
> > + }
> > +
> > + /* Turn On VDD */
> > + regulator_set_voltage(sprd_phy->vdd, sprd_phy->vdd_vol,
> > sprd_phy->vdd_vol);
> > + if (!regulator_is_enabled(sprd_phy->vdd)) {
> > + ret = regulator_enable(sprd_phy->vdd);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + sprd_hsphy_enable(sprd_phy);
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW,
> > + MASK_ANLG_PHY_G2_ANALOG_USB20_USB20
> > _ISO_SW_EN, 0);
> > +
> > + /* usb phy power */
> > + msk = (MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L |
> > + MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S);
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL,
> > + msk, 0);
> > +
> > + /* usb vbus valid */
> > + reg = msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_OTG_PHY_TEST, msk, reg);
> > +
> > + reg = msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
> > + msk, reg);
> > +
> > + /* for SPRD phy utmi_width sel */
> > + reg = msk = MASK_AON_APB_UTMI_WIDTH_SEL;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_OTG_PHY_CTRL, msk, reg);
> > +
> > + reg = msk =
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DATABUS16_8;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
> > + msk, reg);
> > +
> > + reg = TUNEHSAMP_2_6MA;
> > + msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TUNEHSAMP;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING,
> > + msk, reg);
> > +
> > + reg = TFREGRES_TUNE_VALUE;
> > + msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TFREGRES;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING,
> > + msk, reg);
> > +
> > + if (!atomic_read(&sprd_phy->reset)) {
> > + sprd_hsphy_reset_core(sprd_phy);
> > + atomic_set(&sprd_phy->reset, 1);
> > + }
> > +
> > + atomic_set(&sprd_phy->inited, 1);
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_hsphy_shutdown(struct usb_phy *u_phy)
> > +{
> > + struct sprd_hsphy *sprd_phy = container_of(u_phy, struct
> > sprd_hsphy, phy);
> > + u32 reg, msk;
> > +
> > + if (!atomic_read(&sprd_phy->inited)) {
> > + dev_dbg(sprd_phy->dev, "%s is already shut down\n",
> > __func__);
> > + return;
> > + }
> > +
> > + /* usb vbus */
> > + msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_OTG_PHY_TEST, msk, 0);
> > + msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1, msk,
> > 0);
> > +
> > + sprd_hsphy_power_down(sprd_phy);
> > + regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW,
> > + msk, reg);
> > +
> > + /* usb cgm ref */
> > + msk = MASK_AON_APB_CGM_OTG_REF_EN |
> > + MASK_AON_APB_CGM_DPHY_REF_EN;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_CGM_REG1, msk, 0);
> > +
> > + if (regulator_is_enabled(sprd_phy->vdd))
> > + regulator_disable(sprd_phy->vdd);
> > +
> > + atomic_set(&sprd_phy->inited, 0);
> > + atomic_set(&sprd_phy->reset, 0);
> > +}
> > +
> > +static ssize_t vdd_voltage_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct sprd_hsphy *sprd_phy = dev_get_drvdata(dev);
> > +
> > + if (!sprd_phy)
> > + return -EINVAL;
> > +
> > + return sprintf(buf, "%d\n", sprd_phy->vdd_vol);
> > +}
> > +
> > +static ssize_t vdd_voltage_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t size)
> > +{
> > + struct sprd_hsphy *sprd_phy = dev_get_drvdata(dev);
> > + u32 vol;
> > +
> > + if (!sprd_phy)
> > + return -EINVAL;
> > +
> > + if (kstrtouint(buf, 16, &vol) < 0)
> > + return -EINVAL;
> > +
> > + if (vol < 1200000 || vol > 3750000) {
> > + dev_err(dev, "Invalid voltage value %d\n", vol);
> > + return -EINVAL;
> > + }
> > + sprd_phy->vdd_vol = vol;
> > +
> > + return size;
> > +}
> > +static DEVICE_ATTR_RW(vdd_voltage);
>
> Why add voltage setting interface in a usb phy driver? should move to
> regulator driver?
>
> > +
> > +static struct attribute *usb_hsphy_attrs[] = {
> > + &dev_attr_vdd_voltage.attr,
> > + NULL
> > +};
> > +ATTRIBUTE_GROUPS(usb_hsphy);
> > +
> > +static int sprd_hsphy_vbus_notify(struct notifier_block *nb,
> > + unsigned long event, void *data)
> > +{
> > + struct usb_phy *u_phy = container_of(nb, struct usb_phy,
> > vbus_nb);
> > + struct sprd_hsphy *sprd_phy = container_of(u_phy, struct
> > sprd_hsphy, phy);
> > + u32 reg, msk;
> > +
> > + if (sprd_phy->is_host || u_phy->last_event == USB_EVENT_ID)
> > {
> > + dev_info(sprd_phy->dev, "USB PHY is host mode\n");
> > + return 0;
> > + }
> > +
> > + if (event) {
> > + /* usb vbus valid */
> > + reg = msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > + REG_AON_APB_OTG_PHY_TEST, msk, reg);
> > +
> > + reg = msk =
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 1, msk, reg);
> > + usb_phy_set_charger_state(u_phy,
> > USB_CHARGER_PRESENT);
> > + } else {
> > + /* usb vbus invalid */
> > + msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
> > + regmap_update_bits(sprd_phy->hsphy_glb,
> > REG_AON_APB_OTG_PHY_TEST,
> > + msk, 0);
> > + msk =
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
> > + regmap_update_bits(sprd_phy->ana_g2,
> > + REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL
> > 1, msk, 0);
> > + usb_phy_set_charger_state(u_phy,
> > USB_CHARGER_ABSENT);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static enum usb_charger_type sprd_hsphy_charger_detect(struct
> > usb_phy *u_phy)
> > +{
> > + struct sprd_hsphy *sprd_phy = container_of(u_phy, struct
> > sprd_hsphy, phy);
> > +
> > + return sc27xx_charger_detect(sprd_phy->pmic);
> > +}
> > +
> > +static int sprd_hsphy_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *regmap_np;
> > + struct platform_device *regmap_pdev;
> > + struct sprd_hsphy *sprd_phy;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > + struct usb_otg *otg;
> > +
> > + sprd_phy = devm_kzalloc(dev, sizeof(*sprd_phy),
> > GFP_KERNEL);
> > + if (!sprd_phy)
> > + return -ENOMEM;
> > +
> > + regmap_np = of_find_compatible_node(NULL, NULL,
> > "sprd,sc27xx-syscon");
> > + if (!regmap_np) {
> > + dev_err(dev, "unable to get syscon node\n");
> > + return -ENODEV;
> > + }
> > +
> > + regmap_pdev = of_find_device_by_node(regmap_np);
> > + if (!regmap_pdev) {
> > + dev_err(dev, "unable to get syscon platform
> > device\n");
> > + ret = -ENODEV;
> > + goto device_node_err;
> > + }
> > +
> > + sprd_phy->pmic = dev_get_regmap(regmap_pdev->dev.parent,
> > NULL);
> > + if (!sprd_phy->pmic) {
> > + dev_err(dev, "unable to get pmic regmap device\n");
> > + ret = -ENODEV;
> > + goto platform_device_err;
> > + }
> > +
> > + ret = of_property_read_u32(dev->of_node, "sprd,vdd-
> > voltage",
> > + &sprd_phy->vdd_vol);
>
> Where is the DT binding secription?
>
> > + if (ret < 0) {
> > + dev_err(dev, "unable to read ssphy vdd voltage\n");
> > + goto platform_device_err;
> > + }
> > +
> > + sprd_phy->vdd = devm_regulator_get(dev, "vdd");
>
> ditto.
> Please add the DT binding firstly.
next patchset I wiil add the bindings file.
>
> > + if (IS_ERR(sprd_phy->vdd)) {
> > + dev_err(dev, "unable to get ssphy vdd supply\n");
> > + ret = PTR_ERR(sprd_phy->vdd);
> > + goto platform_device_err;
> > + }
> > +
> > + ret = regulator_set_voltage(sprd_phy->vdd, sprd_phy-
> > >vdd_vol, sprd_phy->vdd_vol);
> > + if (ret < 0) {
> > + dev_err(dev, "fail to set ssphy vdd voltage at
> > %dmV\n", sprd_phy->vdd_vol);
> > + goto platform_device_err;
> > + }
> > +
> > + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> > + if (!otg) {
> > + ret = -ENOMEM;
> > + goto platform_device_err;
> > + }
> > +
> > + sprd_phy->ana_g2 = syscon_regmap_lookup_by_phandle(dev-
> > >of_node,
> > + "sprd,syscon-anag2");
> > + if (IS_ERR(sprd_phy->ana_g2)) {
> > + dev_err(&pdev->dev, "ap USB anag2 syscon
> > failed!\n");
> > + ret = PTR_ERR(sprd_phy->ana_g2);
> > + goto platform_device_err;
> > + }
> > +
> > + sprd_phy->hsphy_glb = syscon_regmap_lookup_by_phandle(dev-
> > >of_node,
> > + "sprd,syscon-enable");
> > + if (IS_ERR(sprd_phy->hsphy_glb)) {
> > + dev_err(&pdev->dev, "ap USB aon apb syscon
> > failed!\n");
> > + ret = PTR_ERR(sprd_phy->hsphy_glb);
> > + goto platform_device_err;
> > + }
> > +
> > + sprd_hsphy_enable(sprd_phy);
> > +
> > + sprd_hsphy_power_down(sprd_phy);
>
> Why doing this? please add comments to explain these strange hardware
> operation.
the two actions seems redundant, it should in sprd_hsphy_init. I need
to test on the Soc. if not effect, I wiil remove it.
>
> > +
> > + sprd_phy->phy.dev = dev;
> > + sprd_phy->phy.label = "sprd-hsphy";
> > + sprd_phy->phy.otg = otg;
> > + sprd_phy->phy.init = sprd_hsphy_init;
> > + sprd_phy->phy.shutdown = sprd_hsphy_shutdown;
> > + sprd_phy->phy.set_vbus = sprd_hostphy_set;
> > + sprd_phy->phy.type = USB_PHY_TYPE_USB2;
> > + sprd_phy->phy.vbus_nb.notifier_call =
> > sprd_hsphy_vbus_notify;
> > + sprd_phy->phy.charger_detect = sprd_hsphy_charger_detect;
> > + otg->usb_phy = &sprd_phy->phy;
> > +
> > + platform_set_drvdata(pdev, sprd_phy);
> > +
> > + ret = usb_add_phy_dev(&sprd_phy->phy);
> > + if (ret) {
> > + dev_err(dev, "fail to add phy\n");
> > + goto platform_device_err;
> > + }
> > +
> > + ret = sysfs_create_groups(&dev->kobj, usb_hsphy_groups);
> > + if (ret)
> > + dev_warn(dev, "failed to create usb hsphy
> > attributes\n");
> > +
> > + if (extcon_get_state(sprd_phy->phy.edev, EXTCON_USB) > 0)
> > + usb_phy_set_charger_state(&sprd_phy->phy,
> > USB_CHARGER_PRESENT);
> > +
> > + dev_info(dev, "sprd usb phy probe ok !\n");
>
> Please remove these useless printing.
>
> > +
> > +platform_device_err:
> > +device_node_err:
>
> 2 same level label?
>
> > + of_node_put(regmap_np);
> > +
> > + return ret;
> > +}
> > +
> > +static int sprd_hsphy_remove(struct platform_device *pdev)
> > +{
> > + struct sprd_hsphy *sprd_phy = platform_get_drvdata(pdev);
> > +
> > + sysfs_remove_groups(&pdev->dev.kobj, usb_hsphy_groups);
> > + usb_remove_phy(&sprd_phy->phy);
> > + if (regulator_is_enabled(sprd_phy->vdd))
> > + regulator_disable(sprd_phy->vdd);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id sprd_hsphy_match[] = {
> > + { .compatible = "sprd,ums512-phy"},
> > + {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, sprd_hsphy_match);
> > +
> > +static struct platform_driver sprd_hsphy_driver = {
> > + .probe = sprd_hsphy_probe,
> > + .remove = sprd_hsphy_remove,
> > + .driver = {
> > + .name = "sprd-hsphy",
> > + .of_match_table = sprd_hsphy_match,
> > + },
> > +};
> > +
> > +static int __init sprd_hsphy_driver_init(void)
> > +{
> > + return platform_driver_register(&sprd_hsphy_driver);
> > +}
> > +
> > +static void __exit sprd_hsphy_driver_exit(void)
> > +{
> > + platform_driver_unregister(&sprd_hsphy_driver);
> > +}
> > +
> > +late_initcall(sprd_hsphy_driver_init);
> > +module_exit(sprd_hsphy_driver_exit);
> > +
> > +MODULE_DESCRIPTION("UNISOC USB PHY driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/usb/phy/phy-sprd-ums512.h
> > b/drivers/usb/phy/phy-sprd-ums512.h
> > new file mode 100644
> > index 000000000000..903da0573eae
> > --- /dev/null
> > +++ b/drivers/usb/phy/phy-sprd-ums512.h
> > @@ -0,0 +1,39 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
> > +/*
> > + * Spreadtrum UMS512 SOC USB registers file
> > + *
> > + * Copyright C 2022, Spreadtrum Communications Inc.
> > + */
> > +
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DATABUS16_8
> > 0x10000000
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN 0x8
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLDOWN 0x10
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW_EN 0x1
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L 0x8
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S 0x10
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED 0xff
> > ff
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TFREGRES 0x1f
> > 80000
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TUNEHSAMP 0x60
> > 00000
> > +#define
> > MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT 0x10
> > 000
> > +#define
> > MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN 0x2
> > +#define
> > MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DPPULLDOWN 0x4
> > +#define
> > MASK_AON_APB_ANA_EB 0x10
> > 00
> > +#define
> > MASK_AON_APB_CGM_DPHY_REF_EN 0x40
> > 0
> > +#define
> > MASK_AON_APB_CGM_OTG_REF_EN 0x10
> > 00
> > +#define
> > MASK_AON_APB_OTG_PHY_SOFT_RST 0x20
> > 0
> > +#define
> > MASK_AON_APB_OTG_UTMI_EB 0x10
> > 0
> > +#define
> > MASK_AON_APB_OTG_UTMI_SOFT_RST 0x10
> > 0
> > +#define
> > MASK_AON_APB_OTG_VBUS_VALID_PHYREG 0x10
> > 00000
> > +#define
> > MASK_AON_APB_USB2_PHY_IDDIG 0x8
> > +#define
> > MASK_AON_APB_UTMI_WIDTH_SEL 0x40
> > 000000
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL 0x00
> > 5c
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW 0x00
> > 70
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING 0x00
> > 64
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1 0x00
> > 58
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL2 0x00
> > 60
> > +#define
> > REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0 0x00
> > 74
> > +#define
> > REG_AON_APB_APB_EB1 0x00
> > 04
> > +#define
> > REG_AON_APB_APB_RST1 0x00
> > 10
> > +#define
> > REG_AON_APB_CGM_REG1 0x01
> > 38
> > +#define
> > REG_AON_APB_OTG_PHY_CTRL 0x02
> > 08
> > +#define
> > REG_AON_APB_OTG_PHY_TEST 0x02
> > 04
>
> Move them to the driver file and please rename the ugly macro names,
> too
> long :(
>
> And why not move the usb phy driver to be a generic phy driver? I
> mean
> move it to the drivers/phy.
Do you mean all the usb-phy need move to driver/phy? or just this
driver?