Re: [PATCH v4 4/8] dt-bindings: PCI: dwc: Add dma-ranges, region mask

From: Rob Herring
Date: Fri Mar 17 2023 - 14:30:46 EST


On Mon, Mar 13, 2023 at 02:40:12PM +0200, Elad Nachman wrote:
> From: Elad Nachman <enachman@xxxxxxxxxxx>
>
> Add properties to support configurable DMA mask bits and region mask bits:
>
> 1. configurable dma-ranges is needed for Marvell AC5/AC5X SOCs which
> have their physical DDR memory start at address 0x2_0000_0000.
>
> 2. Configurable region mask bits is needed for the Marvell Armada
> 7020/7040/8040 SOCs when the DT file places the PCIe window above the 4GB region.
> The Synopsis Designware PCIe IP in these SOCs is too old to specify the
> highest memory location supported by the PCIe, but practically supports
> such locations. Allow these locations to be specified in the DT file.
>
> Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
> ---
> v4:
> 1) Fix commit message and its formatting
>
> 2) Replace num-dmamask with dma-ranges
>
> .../devicetree/bindings/pci/snps,dw-pcie-common.yaml | 5 +++++
> Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml | 6 ++++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> index d87e13496834..3cb9af1aefeb 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> @@ -261,6 +261,11 @@ properties:
>
> dma-coherent: true
>
> + num-regionmask:
> + description: |
> + number of region limit mask bits to use, if different than default 32
> + maximum: 64

This should be implied from the compatible string.

> +
> additionalProperties: true
>
> ...
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> index 1a83f0f65f19..ed7ae2a14804 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -197,6 +197,12 @@ properties:
> - contains:
> const: msi
>
> + dma-ranges:
> + description:
> + Defines the DMA mask for devices which due to non-standard HW address
> + assignment have their RAM starting address above the lower 32-bit region.
> + Since this is a mask, only the size attribute of the dma-ranges is used.
> +

No need for this, it is already defined in pci-bus.yaml.

The description is wrong here anyways. The purpose is to translate
inbound PCI addresses to parent bus addresses (and eventually CPU
addresses).

Rob