Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support

From: Christian Marangi
Date: Fri Mar 17 2023 - 10:01:54 EST

Next message: Nicolas Ferre: "Re: [PATCH] net: macb: Set MDIO clock divisor for pclk higher than 160MHz"
Previous message: Muhammad Usama Anjum: "Re: [PATCH v11 1/7] userfaultfd: Add UFFD WP Async support"
In reply to: Andrew Lunn: "Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support"
Next in thread: Michal Kubiak: "Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Mar 17, 2023 at 12:24:23PM +0100, Michal Kubiak wrote:
> On Fri, Mar 17, 2023 at 03:31:13AM +0100, Christian Marangi wrote:
> > Add LEDs basic support for qca8k Switch Family by adding basic
> > brightness_set() support.
> >
> > Since these LEDs refelect port status, the default label is set to
> > ":port". DT binding should describe the color, function and number of
> > the leds using standard LEDs api.
> >
> > These LEDs supports only blocking variant of the brightness_set()
> > function since they can sleep during access of the switch leds to set
> > the brightness.
> >
> > While at it add to the qca8k header file each mode defined by the Switch
> > Documentation for future use.
> >
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
>
> Hi Christian,
>
> Please find my comments inline.
>
> Thanks,
> Michal
>
> > ---
> > drivers/net/dsa/qca/Kconfig | 8 ++
> > drivers/net/dsa/qca/Makefile | 3 +
> > drivers/net/dsa/qca/qca8k-8xxx.c | 5 +
> > drivers/net/dsa/qca/qca8k-leds.c | 192 +++++++++++++++++++++++++++++++
> > drivers/net/dsa/qca/qca8k.h | 59 ++++++++++
> > drivers/net/dsa/qca/qca8k_leds.h | 16 +++
> > 6 files changed, 283 insertions(+)
> > create mode 100644 drivers/net/dsa/qca/qca8k-leds.c
> > create mode 100644 drivers/net/dsa/qca/qca8k_leds.h
> >
> > diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
> > index ba339747362c..7a86d6d6a246 100644
> > --- a/drivers/net/dsa/qca/Kconfig
> > +++ b/drivers/net/dsa/qca/Kconfig
> > @@ -15,3 +15,11 @@ config NET_DSA_QCA8K
> > help
> > This enables support for the Qualcomm Atheros QCA8K Ethernet
> > switch chips.
> > +
> > +config NET_DSA_QCA8K_LEDS_SUPPORT
> > + bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support"
> > + depends on NET_DSA_QCA8K
> > + depends on LEDS_CLASS
> > + help
> > + This enabled support for LEDs present on the Qualcomm Atheros
> > + QCA8K Ethernet switch chips.
> > diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile
> > index 701f1d199e93..ce66b1984e5f 100644
> > --- a/drivers/net/dsa/qca/Makefile
> > +++ b/drivers/net/dsa/qca/Makefile
> > @@ -2,3 +2,6 @@
> > obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
> > obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
> > qca8k-y += qca8k-common.o qca8k-8xxx.o
> > +ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
> > +qca8k-y += qca8k-leds.o
> > +endif
> > diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
> > index 8dfc5db84700..5decf6fe3832 100644
> > --- a/drivers/net/dsa/qca/qca8k-8xxx.c
> > +++ b/drivers/net/dsa/qca/qca8k-8xxx.c
> > @@ -22,6 +22,7 @@
> > #include <linux/dsa/tag_qca.h>
> >
> > #include "qca8k.h"
> > +#include "qca8k_leds.h"
> >
> > static void
> > qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
> > @@ -1727,6 +1728,10 @@ qca8k_setup(struct dsa_switch *ds)
> > if (ret)
> > return ret;
> >
> > + ret = qca8k_setup_led_ctrl(priv);
> > + if (ret)
> > + return ret;
> > +
> > qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
> > qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
> >
> > diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c
> > new file mode 100644
> > index 000000000000..adbe7f6e2994
> > --- /dev/null
> > +++ b/drivers/net/dsa/qca/qca8k-leds.c
> > @@ -0,0 +1,192 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include <linux/regmap.h>
> > +#include <net/dsa.h>
> > +
> > +#include "qca8k.h"
> > +#include "qca8k_leds.h"
> > +
> > +static int
> > +qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
> > +{
> > + switch (port_num) {
> > + case 0:
> > + reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> > + reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT;
> > + break;
> > + case 1:
> > + case 2:
> > + case 3:
> > + /* Port 123 are controlled on a different reg */
> > + reg_info->reg = QCA8K_LED_CTRL_REG(3);
> > + reg_info->shift = QCA8K_LED_PHY123_PATTERN_EN_SHIFT(port_num, led_num);
> > + break;
> > + case 4:
> > + reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> > + reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +qca8k_led_brightness_set(struct qca8k_led *led,
> > + enum led_brightness brightness)
> > +{
> > + struct qca8k_led_pattern_en reg_info;
> > + struct qca8k_priv *priv = led->priv;
> > + u32 mask, val = QCA8K_LED_ALWAYS_OFF;
>
> Nitpick: RCT
>
> > +
> > + qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > + if (brightness)
> > + val = QCA8K_LED_ALWAYS_ON;
> > +
> > + if (led->port_num == 0 || led->port_num == 4) {
> > + mask = QCA8K_LED_PATTERN_EN_MASK;
> > + val <<= QCA8K_LED_PATTERN_EN_SHIFT;
> > + } else {
> > + mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
> > + }
> > +
> > + return regmap_update_bits(priv->regmap, reg_info.reg,
> > + mask << reg_info.shift,
> > + val << reg_info.shift);
> > +}
> > +
> > +static int
> > +qca8k_cled_brightness_set_blocking(struct led_classdev *ldev,
> > + enum led_brightness brightness)
> > +{
> > + struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +
> > + return qca8k_led_brightness_set(led, brightness);
> > +}
> > +
> > +static enum led_brightness
> > +qca8k_led_brightness_get(struct qca8k_led *led)
> > +{
> > + struct qca8k_led_pattern_en reg_info;
> > + struct qca8k_priv *priv = led->priv;
> > + u32 val;
> > + int ret;
> > +
> > + qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > + ret = regmap_read(priv->regmap, reg_info.reg, &val);
> > + if (ret)
> > + return 0;
> > +
> > + val >>= reg_info.shift;
> > +
> > + if (led->port_num == 0 || led->port_num == 4) {
> > + val &= QCA8K_LED_PATTERN_EN_MASK;
> > + val >>= QCA8K_LED_PATTERN_EN_SHIFT;
> > + } else {
> > + val &= QCA8K_LED_PHY123_PATTERN_EN_MASK;
> > + }
> > +
> > + /* Assume brightness ON only when the LED is set to always ON */
> > + return val == QCA8K_LED_ALWAYS_ON;
> > +}
> > +
> > +static int
> > +qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
> > +{
> > + struct fwnode_handle *led = NULL, *leds = NULL;
> > + struct led_init_data init_data = { };
> > + enum led_default_state state;
> > + struct qca8k_led *port_led;
> > + int led_num, port_index;
> > + int ret;
> > +
> > + leds = fwnode_get_named_child_node(port, "leds");
> > + if (!leds) {
> > + dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n",
> > + port_num);
> > + return 0;
> > + }
> > +
> > + fwnode_for_each_child_node(leds, led) {
> > + /* Reg represent the led number of the port.
> > + * Each port can have at least 3 leds attached
> > + * Commonly:
> > + * 1. is gigabit led
> > + * 2. is mbit led
> > + * 3. additional status led
> > + */
> > + if (fwnode_property_read_u32(led, "reg", &led_num))
> > + continue;
> > +
> > + if (led_num >= QCA8K_LED_PORT_COUNT) {
> > + dev_warn(priv->dev, "Invalid LED reg defined %d", port_num);
> > + continue;
> > + }
>
> In the comment above you say "each port can have AT LEAST 3 leds".
> However, now it seems that if the port has more than 3 leds, all the
> remaining leds are not initialized.
> Is this intentional? If so, maybe it is worth describing in the comment
> that for ports with more than 3 leds, only the first 3 leds are
> initialized?
>
> According to the code it looks like the port can have up to 3 leds.
>

Think I should rework the comments and make them more direct/simple.

qca8k switch have a max of 5 port.

each port CAN have a max of 3 leds connected.

It's really a limitation of pin on the switch chip and hw regs so the
situation can't happen.

> > +
> > + port_index = 3 * port_num + led_num;
>
> Can QCA8K_LED_PORT_COUNT be used instead of "3"? I guess it is the number
> of LEDs per port.
>

This variable it's really to make it easier to reference the led in the
priv struct. If asked I can rework this to an array of array (one per
port and each port out of 3 possigle LED).

> > +
> > + port_led = &priv->ports_led[port_index];
>
> Also, the name of the "port_index" variable seems confusing to me. It is
> not an index of the port, but rather a unique index of the LED across
> all ports, right?
>

As said above, they are unique index that comes from port and LED of the
port. Really something to represent the code easier internally.

> > + port_led->port_num = port_num;
> > + port_led->led_num = led_num;
> > + port_led->priv = priv;
> > +
> > + state = led_init_default_state_get(led);
> > + switch (state) {
> > + case LEDS_DEFSTATE_ON:
> > + port_led->cdev.brightness = 1;
> > + qca8k_led_brightness_set(port_led, 1);
> > + break;
> > + case LEDS_DEFSTATE_KEEP:
> > + port_led->cdev.brightness =
> > + qca8k_led_brightness_get(port_led);
> > + break;
> > + default:
> > + port_led->cdev.brightness = 0;
> > + qca8k_led_brightness_set(port_led, 0);
> > + }
> > +
> > + port_led->cdev.max_brightness = 1;
> > + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
> > + init_data.default_label = ":port";
> > + init_data.devicename = "qca8k";
> > + init_data.fwnode = led;
> > +
> > + ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data);
> > + if (ret)
> > + dev_warn(priv->dev, "Failed to int led");
>
> Typo: "init".
> How about adding an index of the LED that could not be initialized?
>

Ok will add more info in the port and led that failed to init.

> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int
> > +qca8k_setup_led_ctrl(struct qca8k_priv *priv)
> > +{
> > + struct fwnode_handle *ports, *port;
> > + int port_num;
> > + int ret;
> > +
> > + ports = device_get_named_child_node(priv->dev, "ports");
> > + if (!ports) {
> > + dev_info(priv->dev, "No ports node specified in device tree!\n");
> > + return 0;
> > + }
> > +
> > + fwnode_for_each_child_node(ports, port) {
> > + if (fwnode_property_read_u32(port, "reg", &port_num))
> > + continue;
> > +
> > + /* Each port can have at least 3 different leds attached.
> > + * Switch port starts from 0 to 6, but port 0 and 6 are CPU
> > + * port. The port index needs to be decreased by one to identify
> > + * the correct port for LED setup.
> > + */
>
> Again, are there really "at least 3 different leds" per port?
> It's confusing a little bit, because QCA8K_LED_PORT_COUNT == 3, so I
> would say it cannot have more than 3.
>
> > + ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num));
>
> As I checked, the function "qca8k_port_to_phy()" can return all 0xFFs
> for port_num == 0. Then, this value is implicitly casted to int (as the
> last parameter of "qca8k_parse_port_leds()"). Internally, in
> "qca8k_parse_port_leds()" this parameter can be used to do some
> computing - that looks dangerous.
> In summary, I think a special check for CPU port_num == 0 should be
> added.
> (I guess the LED configuration i only makes sense for non-CPU ports? It
> seems you want to configure up to 15 LEDs in total for 5 ports).
>

IMHO for this, we can ignore handling this corner case. The hw doesn't
supports leds for port0 and port6 (the 2 CPU port) so the case won't
ever apply. But if asked I can add the case, not that it will cause any
problem in how the regs and shift are referenced in the code.

> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
> > index 4e48e4dd8b0f..3c3c072fa9c2 100644
> > --- a/drivers/net/dsa/qca/qca8k.h
> > +++ b/drivers/net/dsa/qca/qca8k.h
> > @@ -11,6 +11,7 @@
> > #include <linux/delay.h>
> > #include <linux/regmap.h>
> > #include <linux/gpio.h>
> > +#include <linux/leds.h>
> > #include <linux/dsa/tag_qca.h>
> >
> > #define QCA8K_ETHERNET_MDIO_PRIORITY 7
> > @@ -85,6 +86,50 @@
> > #define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x)
> > #define QCA8K_MDIO_MASTER_MAX_PORTS 5
> > #define QCA8K_MDIO_MASTER_MAX_REG 32
> > +
> > +/* LED control register */
> > +#define QCA8K_LED_COUNT 15
> > +#define QCA8K_LED_PORT_COUNT 3
> > +#define QCA8K_LED_RULE_COUNT 6
> > +#define QCA8K_LED_RULE_MAX 11
> > +
> > +#define QCA8K_LED_PHY123_PATTERN_EN_SHIFT(_phy, _led) ((((_phy) - 1) * 6) + 8 + (2 * (_led)))
> > +#define QCA8K_LED_PHY123_PATTERN_EN_MASK GENMASK(1, 0)
> > +
> > +#define QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT 0
> > +#define QCA8K_LED_PHY4_CONTROL_RULE_SHIFT 16
> > +
> > +#define QCA8K_LED_CTRL_REG(_i) (0x050 + (_i) * 4)
> > +#define QCA8K_LED_CTRL0_REG 0x50
> > +#define QCA8K_LED_CTRL1_REG 0x54
> > +#define QCA8K_LED_CTRL2_REG 0x58
> > +#define QCA8K_LED_CTRL3_REG 0x5C
> > +#define QCA8K_LED_CTRL_SHIFT(_i) (((_i) % 2) * 16)
> > +#define QCA8K_LED_CTRL_MASK GENMASK(15, 0)
> > +#define QCA8K_LED_RULE_MASK GENMASK(13, 0)
> > +#define QCA8K_LED_BLINK_FREQ_MASK GENMASK(1, 0)
> > +#define QCA8K_LED_BLINK_FREQ_SHITF 0
> > +#define QCA8K_LED_BLINK_2HZ 0
> > +#define QCA8K_LED_BLINK_4HZ 1
> > +#define QCA8K_LED_BLINK_8HZ 2
> > +#define QCA8K_LED_BLINK_AUTO 3
> > +#define QCA8K_LED_LINKUP_OVER_MASK BIT(2)
> > +#define QCA8K_LED_TX_BLINK_MASK BIT(4)
> > +#define QCA8K_LED_RX_BLINK_MASK BIT(5)
> > +#define QCA8K_LED_COL_BLINK_MASK BIT(7)
> > +#define QCA8K_LED_LINK_10M_EN_MASK BIT(8)
> > +#define QCA8K_LED_LINK_100M_EN_MASK BIT(9)
> > +#define QCA8K_LED_LINK_1000M_EN_MASK BIT(10)
> > +#define QCA8K_LED_POWER_ON_LIGHT_MASK BIT(11)
> > +#define QCA8K_LED_HALF_DUPLEX_MASK BIT(12)
> > +#define QCA8K_LED_FULL_DUPLEX_MASK BIT(13)
> > +#define QCA8K_LED_PATTERN_EN_MASK GENMASK(15, 14)
> > +#define QCA8K_LED_PATTERN_EN_SHIFT 14
> > +#define QCA8K_LED_ALWAYS_OFF 0
> > +#define QCA8K_LED_ALWAYS_BLINK_4HZ 1
> > +#define QCA8K_LED_ALWAYS_ON 2
> > +#define QCA8K_LED_RULE_CONTROLLED 3
> > +
> > #define QCA8K_GOL_MAC_ADDR0 0x60
> > #define QCA8K_GOL_MAC_ADDR1 0x64
> > #define QCA8K_MAX_FRAME_SIZE 0x78
> > @@ -383,6 +428,19 @@ struct qca8k_pcs {
> > int port;
> > };
> >
> > +struct qca8k_led_pattern_en {
> > + u32 reg;
> > + u8 shift;
> > +};
> > +
> > +struct qca8k_led {
> > + u8 port_num;
> > + u8 led_num;
> > + u16 old_rule;
> > + struct qca8k_priv *priv;
> > + struct led_classdev cdev;
> > +};
> > +
> > struct qca8k_priv {
> > u8 switch_id;
> > u8 switch_revision;
> > @@ -407,6 +465,7 @@ struct qca8k_priv {
> > struct qca8k_pcs pcs_port_0;
> > struct qca8k_pcs pcs_port_6;
> > const struct qca8k_match_data *info;
> > + struct qca8k_led ports_led[QCA8K_LED_COUNT];
> > };
> >
> > struct qca8k_mib_desc {
> > diff --git a/drivers/net/dsa/qca/qca8k_leds.h b/drivers/net/dsa/qca/qca8k_leds.h
> > new file mode 100644
> > index 000000000000..ab367f05b173
> > --- /dev/null
> > +++ b/drivers/net/dsa/qca/qca8k_leds.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +#ifndef __QCA8K_LEDS_H
> > +#define __QCA8K_LEDS_H
> > +
> > +/* Leds Support function */
> > +#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
> > +int qca8k_setup_led_ctrl(struct qca8k_priv *priv);
> > +#else
> > +static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv)
> > +{
> > + return 0;
> > +}
> > +#endif
> > +
> > +#endif /* __QCA8K_LEDS_H */
> > --
> > 2.39.2
> >

--
Ansuel

Next message: Nicolas Ferre: "Re: [PATCH] net: macb: Set MDIO clock divisor for pclk higher than 160MHz"
Previous message: Muhammad Usama Anjum: "Re: [PATCH v11 1/7] userfaultfd: Add UFFD WP Async support"
In reply to: Andrew Lunn: "Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support"
Next in thread: Michal Kubiak: "Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]