Re: [PATCH V15 0/9] Add Qualcomm Technologies, Inc. PM8008 regulator driver

[Luca Weiss]

Hi Satya,

On Tue Jun 14, 2022 at 11:48 AM CEST, Satya Priya wrote:
> Satya Priya (9):
>   dt-bindings: mfd: pm8008: Add reset-gpios
>   dt-bindings: mfd: pm8008: Change the address cells
>   dt-bindings: mfd: pm8008: Add regulators for pm8008
>   mfd: pm8008: Add reset-gpios
>   mfd: pm8008: Remove the regmap member from pm8008_data struct
>   mfd: pm8008: Use i2c_new_dummy_device() API
>   regulator: Add a regulator driver for the PM8008 PMIC
>   arm64: dts: qcom: pm8008: Add base dts file
>   arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

Is there any activity on this patch series? It's been a few months since
this revision. Would be interested in this for the pm8008 found on
sm7225-fairphone-fp4.

Regards
Luca

>
>  .../devicetree/bindings/mfd/qcom,pm8008.yaml       |  69 +++++-
>  arch/arm64/boot/dts/qcom/pm8008.dtsi               |  54 +++++
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  66 ++++++
>  drivers/mfd/qcom-pm8008.c                          |  60 ++++-
>  drivers/regulator/Kconfig                          |   9 +
>  drivers/regulator/Makefile                         |   1 +
>  drivers/regulator/qcom-pm8008-regulator.c          | 242 +++++++++++++++++++++
>  include/linux/mfd/qcom_pm8008.h                    |   9 +
>  8 files changed, 492 insertions(+), 18 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
>  create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
>  create mode 100644 include/linux/mfd/qcom_pm8008.h
>
> -- 
> 2.7.4