[PATCH 1/3] dt-bindings: iio: Add KX132 accelerometer

[Mehdi Djait]

Extend the kionix,kx022a.yaml file to support the
kx132 device

Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
---
 .../bindings/iio/accel/kionix,kx022a.yaml           | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..ac1e27402d5e 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,22 @@
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A and KX132 Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@xxxxxxxxx>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A and KX132 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
+  16G ranges, output data-rates from 0.78Hz to 1600Hz and a hardware-fifo
+  buffering.
+  KX022A and KX132 can be accessed either via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132
 
   reg:
     maxItems: 1
-- 
2.30.2