[PATCH v2 10/14] arm64: dts: qcom: sm6375: Add TSENS

[Konrad Dybcio]

Add nodes for the two TSENS v2.8.0 controllers present on the SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 59d7ed25aa36..a88ed6467e68 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -764,6 +764,28 @@ spmi_bus: spmi@1c40000 {
 			#interrupt-cells = <4>;
 		};
 
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04411000 0 0x140>, /* TM */
+			      <0 0x04410000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <15>;
+		};
+
+		tsens1: thermal-sensor@4413000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04413000 0 0x140>, /* TM */
+			      <0 0x04412000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <11>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0 0x045f0000 0 0x7000>;

-- 
2.39.2