Re: [PATCH v2] PCI: apple: Set only available ports up

[Lorenzo Pieralisi]

On Thu, Mar 16, 2023 at 09:32:35AM +0000, Marc Zyngier wrote:
> On Thu, 09 Mar 2023 16:39:35 +0000,
> Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > 
> > [+cc Daire, Conor for apple/microchip use of ECAM .init() method]
> > 
> > On Thu, Mar 09, 2023 at 02:36:24PM +0100, Janne Grunau wrote:
> > > Fixes following warning inside of_irq_parse_raw() called from the common
> > > PCI device probe path.
> > > 
> > >   /soc/pcie@690000000/pci@1,0 interrupt-map failed, using interrupt-controller
> > >   WARNING: CPU: 4 PID: 252 at drivers/of/irq.c:279 of_irq_parse_raw+0x5fc/0x724
> > 
> > Based on this commit log, I assume this patch only fixes the warning,
> > and the system *works* just fine either way.  If that's the case, it's
> > debatable whether it meets the stable kernel criteria, although the
> > documented criteria are much stricter than what happens in practice.
> > 
> > >   ...
> > >   Call trace:
> > >    of_irq_parse_raw+0x5fc/0x724
> > >    of_irq_parse_and_map_pci+0x128/0x1d8
> > >    pci_assign_irq+0xc8/0x140
> > >    pci_device_probe+0x70/0x188
> > >    really_probe+0x178/0x418
> > >    __driver_probe_device+0x120/0x188
> > >    driver_probe_device+0x48/0x22c
> > >    __device_attach_driver+0x134/0x1d8
> > >    bus_for_each_drv+0x8c/0xd8
> > >    __device_attach+0xdc/0x1d0
> > >    device_attach+0x20/0x2c
> > >    pci_bus_add_device+0x5c/0xc0
> > >    pci_bus_add_devices+0x58/0x88
> > >    pci_host_probe+0x124/0x178
> > >    pci_host_common_probe+0x124/0x198 [pci_host_common]
> > >    apple_pcie_probe+0x108/0x16c [pcie_apple]
> > >    platform_probe+0xb4/0xdc
> > > 
> > > This became apparent after disabling unused PCIe ports in the Apple
> > > silicon device trees instead of deleting them.
> > > 
> > > Use for_each_available_child_of_node instead of for_each_child_of_node
> > > which takes the "status" property into account.
> > > 
> > > Link: https://lore.kernel.org/asahi/20230214-apple_dts_pcie_disable_unused-v1-0-5ea0d3ddcde3@xxxxxxxxxx/
> > > Link: https://lore.kernel.org/asahi/1ea2107a-bb86-8c22-0bbc-82c453ab08ce@xxxxxxxxxx/
> > > Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > Reviewed-by: Marc Zyngier <maz@xxxxxxxxxx>
> > > Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
> > > ---
> > > Changes in v2:
> > > - rewritten commit message with more details and corrections
> > > - collected Marc's "Reviewed-by:"
> > > - Link to v1: https://lore.kernel.org/r/20230307-apple_pcie_disabled_ports-v1-1-b32ef91faf19@xxxxxxxxxx
> > > ---
> > >  drivers/pci/controller/pcie-apple.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> > > index 66f37e403a09..f8670a032f7a 100644
> > > --- a/drivers/pci/controller/pcie-apple.c
> > > +++ b/drivers/pci/controller/pcie-apple.c
> > > @@ -783,7 +783,7 @@ static int apple_pcie_init(struct pci_config_window *cfg)
> > >  	cfg->priv = pcie;
> > >  	INIT_LIST_HEAD(&pcie->ports);
> > >  
> > > -	for_each_child_of_node(dev->of_node, of_port) {
> > > +	for_each_available_child_of_node(dev->of_node, of_port) {
> > >  		ret = apple_pcie_setup_port(pcie, of_port);
> > >  		if (ret) {
> > >  			dev_err(pcie->dev, "Port %pOF setup fail: %d\n", of_port, ret);
> > 
> > Is this change still needed after 6fffbc7ae137 ("PCI: Honor firmware's
> > device disabled status")?  This is a generic problem, and it would be
> > a lot nicer if we had a generic solution.  But I assume it *is* still
> > needed because Rob gave his Reviewed-by.
> 
> I'm not sure this is addressing the same issue. The way I read it, the
> patch you mention here allows a PCI device to be disabled in firmware,
> even if it could otherwise be probed.
> 
> What this patch does is to prevent root ports that exist in the HW but
> that have been disabled from being probed. Same concept, only at a
> different level.

A root port is a PCI device though and that's what's causing the warning
AFAIK (? it is triggered on the root port PCI device pci_assign_irq()
call), I am not sure the root port DT node is associated with the root
port PCI device correctly, which might explain why, even after
6fffbc7ae137, the PCI enumeration code is adding the root port PCI
device to the PCI tree.

Is the dts available anywhere ? How are root ports described in it ?

Lorenzo