[PATCH 14/16] ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges

[Manivannan Sadhasivam]

To maintain the uniformity, let's use the 0x prefix for the values of
ranges property.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92aa2b081901..210b24e510c5 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1494,8 +1494,8 @@ pcie: pci@1b500000 {
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
-				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
+				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
-- 
2.25.1