[PATCH] Documentation: kernel-parameters: sort NFS parameters

[Randy Dunlap]

Sort the NFS kernel command line parameters. This is done in 4 groups
so as to not have them intermingled: 'nfs' module parameters, 'nfs4'
module parameters, 'nfsd' module parameters, and nfs "global" (__setup,
no module) parameters.

There were 5 parameters which were listed with a space between the
parameter name and the following '=' sign. The space has been
removed since module parameters expect 'parameter=' with no intervening
space.

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: Trond Myklebust <trond.myklebust@xxxxxxxxxxxxxxx>
Cc: Anna Schumaker <anna@xxxxxxxxxx>
Cc: Chuck Lever <chuck.lever@xxxxxxxxxx>
Cc: Jeff Layton <jlayton@xxxxxxxxxx>
Cc: linux-nfs@xxxxxxxxxxxxxxx
---
 Documentation/admin-guide/kernel-parameters.txt |   74 +++++++-------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3428,14 +3428,13 @@
 			1 to enable accounting
 			Default value is 0.
 
-	nfsaddrs=	[NFS] Deprecated.  Use ip= instead.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
-
-	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
 
-	nfsrootdebug	[NFS] enable nfsroot debugging messages.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
 
 	nfs.callback_nr_threads=
 			[NFSv4] set the total number of threads that the
@@ -3446,18 +3445,6 @@
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
-	nfs.cache_getent=
-			[NFS] sets the pathname to the program which is used
-			to update the NFS client cache entries.
-
-	nfs.cache_getent_timeout=
-			[NFS] sets the timeout after which an attempt to
-			update a cache entry is deemed to have failed.
-
-	nfs.idmap_cache_timeout=
-			[NFS] set the maximum lifetime for idmapper cache
-			entries.
-
 	nfs.enable_ino64=
 			[NFS] enable 64-bit inode numbers.
 			If zero, the NFS client will fake up a 32-bit inode
@@ -3465,6 +3452,10 @@
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
+	nfs.idmap_cache_timeout=
+			[NFS] set the maximum lifetime for idmapper cache
+			entries.
+
 	nfs.max_session_cb_slots=
 			[NFSv4.1] Sets the maximum number of session
 			slots the client will assign to the callback
@@ -3492,21 +3483,14 @@
 			will be autodetected by the client, and it will fall
 			back to using the idmapper.
 			To turn off this behaviour, set the value to '0'.
+
 	nfs.nfs4_unique_id=
 			[NFS4] Specify an additional fixed unique ident-
 			ification string that NFSv4 clients can insert into
 			their nfs_client_id4 string.  This is typically a
 			UUID that is generated at system install time.
 
-	nfs.send_implementation_id =
-			[NFSv4.1] Send client implementation identification
-			information in exchange_id requests.
-			If zero, no implementation identification information
-			will be sent.
-			The default is to send the implementation identification
-			information.
-
-	nfs.recover_lost_locks =
+	nfs.recover_lost_locks=
 			[NFSv4] Attempt to recover locks that were lost due
 			to a lease timeout on the server. Please note that
 			doing this risks data corruption, since there are
@@ -3518,7 +3502,15 @@
 			The default parameter value of '0' causes the kernel
 			not to attempt recovery of lost locks.
 
-	nfs4.layoutstats_timer =
+	nfs.send_implementation_id=
+			[NFSv4.1] Send client implementation identification
+			information in exchange_id requests.
+			If zero, no implementation identification information
+			will be sent.
+			The default is to send the implementation identification
+			information.
+
+	nfs4.layoutstats_timer=
 			[NFSv4.2] Change the rate at which the kernel sends
 			layoutstats to the pNFS metadata server.
 
@@ -3527,12 +3519,19 @@
 			driver. A non-zero value sets the minimum interval
 			in seconds between layoutstats transmissions.
 
-	nfsd.inter_copy_offload_enable =
+	nfsd.inter_copy_offload_enable=
 			[NFSv4.2] When set to 1, the server will support
 			server-to-server copies for which this server is
 			the destination of the copy.
 
-	nfsd.nfsd4_ssc_umount_timeout =
+	nfsd.nfs4_disable_idmapping=
+			[NFSv4] When set to the default of '1', the NFSv4
+			server will return only numeric uids and gids to
+			clients using auth_sys, and will accept numeric uids
+			and gids from such clients.  This is intended to ease
+			migration from NFSv2/v3.
+
+	nfsd.nfsd4_ssc_umount_timeout=
 			[NFSv4.2] When used as the destination of a
 			server-to-server copy, knfsd temporarily mounts
 			the source server.  It caches the mount in case
@@ -3540,13 +3539,14 @@
 			used for the number of milliseconds specified by
 			this parameter.
 
-	nfsd.nfs4_disable_idmapping=
-			[NFSv4] When set to the default of '1', the NFSv4
-			server will return only numeric uids and gids to
-			clients using auth_sys, and will accept numeric uids
-			and gids from such clients.  This is intended to ease
-			migration from NFSv2/v3.
+	nfsaddrs=	[NFS] Deprecated.  Use ip= instead.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
+
+	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
 
+	nfsrootdebug	[NFS] enable nfsroot debugging messages.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
 
 	nmi_backtrace.backtrace_idle [KNL]
 			Dump stacks even of idle CPUs in response to an