Re: [PATCH v3 5/7] PCI: dwc: support AC5 Legacy PCIe interrupts

From: Bjorn Helgaas
Date: Thu Feb 23 2023 - 14:48:52 EST


On Thu, Feb 23, 2023 at 08:05:29PM +0200, Elad Nachman wrote:
> From: Elad Nachman <enachman@xxxxxxxxxxx>
>
> Support message emulation of Legacy PCIe interrupts for Marvell AC5/X.
> These message emulations require writing an additional status register
> with acknowledge bits.
>
> Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
> ---
> drivers/pci/controller/dwc/pcie-armada8k.c | 41 +++++++++++++++-------
> 1 file changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index 02481ecadd25..145434c7a9fb 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -46,7 +46,7 @@ struct armada8k_pcie_of_data {
> const struct dw_pcie_ops *pcie_ops;
> };
>
> -#define PCIE_VENDOR_REGS_OFFSET 0x8000 /* in ac5 is 0x10000 */
> +#define PCIE_VENDOR_REGS_OFFSET 0x8000 /* in ac5 is in another region */
>
> #define PCIE_GLOBAL_CONTROL_REG (PCIE_VENDOR_REGS_OFFSET + 0x0)
> #define PCIE_APP_LTSSM_EN BIT(2)
> @@ -61,6 +61,7 @@ struct armada8k_pcie_of_data {
>
> #define PCIE_GLOBAL_INT_CAUSE1_REG (PCIE_VENDOR_REGS_OFFSET + 0x1C)
> #define PCIE_GLOBAL_INT_MASK1_REG (PCIE_VENDOR_REGS_OFFSET + 0x20)
> +#define PCIE_GLOBAL_INT_CAUSE2_REG (PCIE_VENDOR_REGS_OFFSET + 0x24)
> #define PCIE_GLOBAL_INT_MASK2_REG (PCIE_VENDOR_REGS_OFFSET + 0x28)
> #define PCIE_INT_A_ASSERT_MASK BIT(9)
> #define PCIE_INT_B_ASSERT_MASK BIT(10)
> @@ -267,8 +268,14 @@ static irqreturn_t armada8k_pcie_irq_handler(int irq, void *arg)
> */
> val = dw_pcie_readl_dbi(pci, PCIE_GLOBAL_INT_CAUSE1_REG);
> dw_pcie_writel_dbi(pci, PCIE_GLOBAL_INT_CAUSE1_REG, val);
> - if ((PCIE_MSI_MASK_AC5 & val) && (pcie->pcie_type == ARMADA8K_PCIE_TYPE_AC5))
> - dw_handle_msi_irq(&pci->pp);
> + if (pcie->pcie_type == ARMADA8K_PCIE_TYPE_AC5) {
> + if (PCIE_MSI_MASK_AC5 & val)
> + dw_handle_msi_irq(&pci->pp);
> +
> + val = dw_pcie_readl_dbi(pci, PCIE_GLOBAL_INT_CAUSE2_REG);
> + /* Now clear the second interrupt cause. */
> + dw_pcie_writel_dbi(pci, PCIE_GLOBAL_INT_CAUSE2_REG, val);
> + }
>
> return IRQ_HANDLED;
> }
> @@ -307,24 +314,29 @@ static int armada8k_add_pcie_port(struct armada8k_pcie *pcie,
> return 0;
> }
>
> -static u32 ac5_xlate_dbi_reg(u32 reg)
> +static void __iomem *ac5_xlate_dbi_reg(struct dw_pcie *pci,
> + void __iomem *base,
> + u32 reg)
> {
> /* Handle AC5 ATU access */
> if ((reg & ~0xfffff) == PCIE_ATU_ACCESS_MASK_AC5) {
> reg &= 0xfffff;
> - /* ATU registers offset is 0xC00 + 0x200 * n,
> + /* ATU registers offset is 0xC000 + 0x200 * n,
> * from RFU registers.
> */
> - reg = 0xc000 | (0x200 * (reg >> 9)) | (reg & 0xff);
> + reg = (0x200 * (reg >> 9)) | (reg & 0xff);

Is this change from 0xC00 to 0xC000 a bug fix? This purports to only
add functionality. A bug fix should be split to its own patch.

The armada8k_pcie_irq_handler() change above looks like it goes with
the commit log, but all this other stuff looks like separate logical
changes that should be in separate patches.

> + return pci->atu_base + reg;
> } else if ((reg & 0xfffff000) == PCIE_VENDOR_REGS_OFFSET) {
> /* PCIe RFU registers in A8K are at offset 0x8000 from base
> * (0xf2600000) while in AC5 offset is 0x10000 from base
> - * (0x800a0000) therefore need the addition of 0x8000.
> + * (0x800a0000) therefore need to be reduced by 0x8000
> + * and rebased from dbi2 base, which is set to the PCIe rfu
> + * base in the AC5 dts:
> */
> - reg += PCIE_VENDOR_REGS_OFFSET;
> + reg -= PCIE_VENDOR_REGS_OFFSET;
> + return pci->dbi_base2 + reg;
> }
> -
> - return reg;
> + return base + reg;
> }
>
> static u32 ac5_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
> @@ -332,14 +344,14 @@ static u32 ac5_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
> {
> u32 val;
>
> - dw_pcie_read(base + ac5_xlate_dbi_reg(reg), size, &val);
> + dw_pcie_read(ac5_xlate_dbi_reg(pci, base, reg), size, &val);
> return val;
> }
>
> static void ac5_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
> u32 reg, size_t size, u32 val)
> {
> - dw_pcie_write(base + ac5_xlate_dbi_reg(reg), size, val);
> + dw_pcie_write(ac5_xlate_dbi_reg(pci, base, reg), size, val);
> }
>
> static const struct dw_pcie_ops armada8k_dw_pcie_ops = {
> @@ -418,7 +430,6 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
> ret = PTR_ERR(pci->dbi_base);
> goto fail_clkreg;
> }
> -
> ret = armada8k_pcie_setup_phys(pcie);
> if (ret)
> goto fail_clkreg;
> @@ -429,6 +440,10 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
> if (ret)
> goto disable_phy;
>
> + /* backwards compatibility with older dts files: */
> + if (!pci->dbi_base2)
> + pci->dbi_base2 = pci->dbi_base;
> +
> return 0;
>
> disable_phy:
> --
> 2.17.1
>