[PATCH v1 0/2] Fix vbus draw of dwc3 gadget

From: Prashanth K
Date: Thu Feb 23 2023 - 00:18:54 EST


Currently dwc3 gadget processes the suspend interrupt event only
if the device is in configured state. But consider a case where
device is not configured and got suspend interrupt, in that case
our gadget would still use 100mA as composite_suspend didn't happen.
But battery charging specification (BC1.2) expects a downstream
device to draw less than 2.5mA when unconnected OR suspended.

And while resuming, the gadget can draw upto 100mA if its not
configured, but the current implementation of composite_resume
doesnt consider the case of unconfigured device. This series
addresses the above mentioned issues.

Prashanth K (2):
usb: dwc3: gadget: Change condition for processing suspend event
usb: gadget: composite: Draw 100mA current if not configured

drivers/usb/dwc3/gadget.c | 11 ++---------
drivers/usb/gadget/composite.c | 2 ++
2 files changed, 4 insertions(+), 9 deletions(-)

--
2.7.4