[PATCH 06/11] ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}

[Manivannan Sadhasivam]

There is only one PCIe PHY in this SoC, so there is no need to add an
index to the suffix. This also matches the naming convention of the PCIe
controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 2 +-
 arch/arm/boot/dts/qcom-sdx55.dtsi                | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index ac8b4626ae9a..b7ee0237608f 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -242,7 +242,7 @@ &ipa {
 	memory-region = <&ipa_fw_mem>;
 };
 
-&pcie0_phy {
+&pcie_phy {
 	status = "okay";
 
 	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index e84ca795cae6..a1f4a7b0904a 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -334,7 +334,7 @@ pcie_ep: pcie-ep@1c00000 {
 			resets = <&gcc GCC_PCIE_BCR>;
 			reset-names = "core";
 			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
+			phys = <&pcie_lane>;
 			phy-names = "pciephy";
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -342,7 +342,7 @@ pcie_ep: pcie-ep@1c00000 {
 			status = "disabled";
 		};
 
-		pcie0_phy: phy@1c07000 {
+		pcie_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
 			reg = <0x01c07000 0x1c4>;
 			#address-cells = <1>;
@@ -362,7 +362,7 @@ pcie0_phy: phy@1c07000 {
 
 			status = "disabled";
 
-			pcie0_lane: lanes@1c06000 {
+			pcie_lane: lanes@1c06000 {
 				reg = <0x01c06000 0x104>, /* tx0 */
 				      <0x01c06200 0x328>, /* rx0 */
 				      <0x01c07200 0x1e8>, /* pcs */
-- 
2.25.1