[PATCH v5 0/5] Add MAX77541/MAX77540 PMIC Support

[Okan Sahin]

MFD, regulator and ADC driver and related bindings for MAX77540/MAX77541.
The patches are required to be applied in sequence.

Changes in v5:
* Patch 1: "dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator"
  * Drop compatible properties.
* Patch 2: "regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support"
  * Change if-else ladder to switch case for chip->id
  * Drop driver_data in platform_device_id
* Patch 3: "iio: adc: : max77541 Add ADI MAX77541 ADC Support"
  * Drop max77541_adc_iio struct
* Patch 4: "dt-bindings: mfd: max77541: adi,max77541.yaml Add MAX77541 bindings"
  * Drop allOf
* Patch 5: "mfd: max77541: Add MAX77541/MAX77540 PMIC Support"
  * Dont use compatible when using MFD_CELL_OF MACRO

Changes in v4:
* Patch 1: "dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator"
  * NO CHANGE
* Patch 2: "drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support"
  * Drop OF ID Table
  * Drop driver_data in platform_device_id
* Patch 3: "drivers: iio: adc: Add ADI MAX77541 ADC Support"
  * Add missing blank line
* Patch 4: "dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings"
  * NO CHANGE(Order of patchset changed, and [4/5] has dependency to [1/5])
* Patch 5: "drivers: mfd: Add MAX77541/MAX77540 PMIC Support"
  * Use pointers in the driver_data
  * Use probe_new instead of probe
  * Use PLATFORM_DEVID_NONE macro instead of "-1"

Changes in v3:
* Patch 1: "drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support"
  * Change struct name from max77541_dev to max77541
  * Adjust max-line-length lower than 80
* Patch 2: "dt-bindings: mfd: Add ADI MAX77541/MAX77540"
  * Remove adc object as we do not need
  * Remove adc node from example
* Patch 3: "drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support"
  * Change node name from "BUCK#_id" to "buck#_id" in regulator desc
* Patch 4: "dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator"
  * Change node name from "BUCK" to "buck" in regulators
* Patch 5: "drivers: iio: adc: Add ADI MAX77541 ADC Support"
  * Convert voltage values from V to mV for scaling.
  * Convert temperature values from C to miliC for scale and offset
  * Do not set offset bit in info_mask_separate for voltage that does not need offset
  * Remove unnecessary dev_get_drvdata() instead of it use dev_get_regmap to have regmap.
  * Assing hard coded name for adc dev name

Changes in v2:
* Patch 1: "drivers: mfd: Add MAX77541/MAX77540 PMIC Support"
  * Drop "this patch adds" from commit message.
  * Drop redundant blank lines.
  * Drop module version
  * Use definition for parameter of devm_mfd_add_devices(.., -1,..)
  * Use desc in chip_info to adding desc for different devices.
  * Add missing headers and forward declarations.
  * Drop unused elements from max77541_dev struct
  * Add chip_info into max77541_dev struct to identify different devices.
* Patch 2: "dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings"
  * Drop "this patch adds" from commit message.
  * Fix $ref path
  * Drop adc part under allOf
  * Keep only one example (more complex one)
  * Fix make dt_binding_check errors.(trailing space, No newline)
* Patch 3: "drivers: regulator: Add MAX77541 Regulator Support"
  * Drop "this patch adds" from commit message.
  * Add trailing comma for required structs.
  * Fix wrong indentation.
  * Drop redundant blank lines.
  * Drop max77541_regulator_dev struct.
  * Use "regulator_desc *desc" for both regulator
    regarding to "max77541->id"
* Patch 4: "dt-bindings: regulator: max77541-regulator.yaml Add MAX77541
            Regulator bindings"
  * Drop "this patch adds" from commit message.
  * Chance filename (matching compatible), so adi,max77541-regulator.yaml
  * Fix make dt_binding_check errors.(trailing space, No newline)
* Patch 5: "drivers: iio: adc: Add MAX77541 ADC Support"
  * Drop "this patch adds" from commit message.
  * Drop redundant blank lines.
  * Fix wrong include path.
  * Use switch instead of if-else for range setting in max77541_adc_scale
  * Move max77541_adc_range enum from max77541.h to here.
  * Use definition from units.h
  * Drop unused elements from max77541_adc_iio struct
  * Drop the .data from platform_device_id

Okan Sahin (5):
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support

 .../devicetree/bindings/mfd/adi,max77541.yaml |  68 +++++
 .../regulator/adi,max77541-regulator.yaml     |  38 +++
 drivers/iio/adc/Kconfig                       |  11 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/max77541-adc.c                | 195 ++++++++++++++
 drivers/mfd/Kconfig                           |  13 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/max77541.c                        | 243 ++++++++++++++++++
 drivers/regulator/Kconfig                     |   9 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/max77541-regulator.c        | 154 +++++++++++
 include/linux/mfd/max77541.h                  | 102 ++++++++
 12 files changed, 836 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
 create mode 100644 drivers/iio/adc/max77541-adc.c
 create mode 100644 drivers/mfd/max77541.c
 create mode 100644 drivers/regulator/max77541-regulator.c
 create mode 100644 include/linux/mfd/max77541.h

-- 
2.30.2