Re: [PATCH v3 0/5] apple-gmux: support MMIO gmux type on T2 Macs

[Aditya Garg]

> On 18-Feb-2023, at 6:50 PM, Orlando Chamberlain <orlandoch.dev@xxxxxxxxx> wrote:
> Hi All,
> This patch series adds support for the MMIO based gmux present on these
> Dual GPU Apple T2 Macs: MacBookPro15,1, MacBookPro15,3, MacBookPro16,1,
> MacBookPro16,4 (although amdgpu isn't working on MacBookPro16,4 [1]).
> 

Could be an upstream bug, but I’ve noticed that after using these patches, if I add `acpi_backlight=video` in the command line, it still uses `gmux_backlight`

Hans, any ideas why?

> Changes from v2[2]:
> 
> - Add "," to last item in apple_gmux_type enum
> - Don't not clear interrupts when status is 0
> - Don't check if we failed to make debugfs folder
> - Check for fake mmio gmux
> 
> # 1:
> 
> has a slight change in how the switch state is read: instead of checking
> for x == 2, check !(x & 1)
> 
> # 2:
> 
> implements a system to support more than 2 gmux types
> 
> # 3:
> 
> start using the gmux's GMSP acpi method when handling interrupts on MMIO
> gmux's. This is needed for the MMIO gmux's to clear interrupts.
> 
> # 4:
> 
> Adds support for the MMIO based gmux on T2 macs.
> 
> # 5:
> 
> Add a debugfs interface to apple-gmux so data from ports can be read
> and written to from userspace.
> 
> This can be used for more easily researching what unknown ports do,
> and switching gpus when vga_switcheroo isn't ready (e.g. when one gpu
> is bound to vfio-pci and in use by a Windows VM, I can use this to
> switch my internal display between Linux and Windows easily).
> 
> # Issues:
> 
> 1. Switching gpus at runtime has the same issue as indexed gmux's: the
> inactive gpu can't probe the DDC lines for eDP [3]
> 
> 2. iMacPro1,1, iMac20,1 and iMac20,2 all seem to have a gmux in their
> acpi tables, but they shouldn't. A check that hopefully will detect this
> is used, but it's untested as I don't have any of those computers.
> 
> 3. Powering on the amdgpu with vga_switcheroo doesn't work well. I'm
> told on the MacBookPro15,1 it works sometimes, and adding delays helps,
> but on my MacBookPro16,1 I haven't been able to get it to work at all:
> 
> amdgpu: switched off
> amdgpu: switched on
> amdgpu 0000:03:00.0:
>    Unable to change power state from D3hot to D0, device inaccessible
> amdgpu 0000:03:00.0:
>    Unable to change power state from D3cold to D0, device inaccessible
> [drm] PCIE GART of 512M enabled (table at 0x00000080FEE00000).
> [drm] PSP is resuming...
> [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
> [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed
> [drm:amdgpu_device_fw_loading [amdgpu]]
>    *ERROR* resume of IP block <psp> failed -62
> amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
> snd_hda_intel 0000:03:00.1: Enabling via vga_switcheroo
> snd_hda_intel 0000:03:00.1:
>    Unable to change power state from D3cold to D0, device inaccessible
> snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
> snd_hda_codec_hdmi hdaudioC0D0: Unable to sync register 0x2f0d00. -5
> 
> There are some acpi methods (PWRD, PWG1 [4, 5]) that macOS calls when
> changing the amdgpu's power state, but we don't use them and that could be
> a cause. Additionally unlike previous generation Macbooks which work
> better, on MacBookPro16,1 the gpu is located behind 2 pci bridges:
> 
> 01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI]
>    Navi 10 XL Upstream Port of PCI Express Switch (rev 43)
> 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI]
>    Navi 10 XL Downstream Port of PCI Express Switch
> 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
>    Navi 14 [Radeon RX 5500/5500M / Pro 5500M] (rev 43)
> 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI]
>    Navi 10 HDMI Audio
> 
> Upon attempting to power on the gpu with vga_switcheroo, all these
> devices except 01:00.0 have their config space filled with 1s.
> Rescanning pci makes the config space of all the devices go back to
> normal, however amdgpu still fails to resume with the same logs as
> above.
> 
> [1]: https://lore.kernel.org/all/3AFB9142-2BD0-46F9-AEA9-C9C5D13E68E6@xxxxxxxx/
> [2]: https://lore.kernel.org/platform-driver-x86/20230216122342.5918-1-orlandoch.dev@xxxxxxxxx/
> [3]: https://lore.kernel.org/all/9eed8ede6f15a254ad578e783b050e1c585d5a15.1439288957.git.lukas@xxxxxxxxx/
> [4]: https://gist.github.com/Redecorating/6c7136b7a4ac7ce3b77d8e41740dd87b
> [5]: https://lore.kernel.org/all/20120710160555.GA31562@xxxxxxxxxxxxx/
> 
> Orlando Chamberlain (5):
>  apple-gmux: use first bit to check switch state
>  apple-gmux: refactor gmux types
>  apple-gmux: Use GMSP acpi method for interrupt clear
>  apple-gmux: support MMIO gmux on T2 Macs
>  apple-gmux: add debugfs interface
> 
> drivers/platform/x86/apple-gmux.c | 349 ++++++++++++++++++++++++++----
> include/linux/apple-gmux.h        |  70 ++++--
> 2 files changed, 357 insertions(+), 62 deletions(-)
> 
> -- 
> 2.39.1