Re: [PATCH] dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema

[Kelvin Cheung]

On Mon, Feb 20, 2023 at 6:28 PM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 20/02/2023 11:25, Kelvin Cheung wrote:
> > On Mon, Feb 20, 2023 at 4:04 PM Krzysztof Kozlowski
> > <krzysztof.kozlowski@xxxxxxxxxx> wrote:
> >>
> >> On 18/02/2023 13:22, Keguang Zhang wrote:
> >>> Convert the Loongson1 interrupt controller dt-bindings to json-schema.
> >>>
> >>> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> >>> ---
> >>>  .../loongson,ls1x-intc.txt                    | 24 ---------
> >>>  .../loongson,ls1x-intc.yaml                   | 51 +++++++++++++++++++
> >>>  2 files changed, 51 insertions(+), 24 deletions(-)
> >>>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> >>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> >>> deleted file mode 100644
> >>> index a63ed9fcb535..000000000000
> >>> --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> >>> +++ /dev/null
> >>> @@ -1,24 +0,0 @@
> >>> -Loongson ls1x Interrupt Controller
> >>> -
> >>> -Required properties:
> >>> -
> >>> -- compatible : should be "loongson,ls1x-intc". Valid strings are:
> >>> -
> >>> -- reg : Specifies base physical address and size of the registers.
> >>> -- interrupt-controller : Identifies the node as an interrupt controller
> >>> -- #interrupt-cells : Specifies the number of cells needed to encode an
> >>> -  interrupt source. The value shall be 2.
> >>> -- interrupts : Specifies the CPU interrupt the controller is connected to.
> >>> -
> >>> -Example:
> >>> -
> >>> -intc: interrupt-controller@1fd01040 {
> >>> -     compatible = "loongson,ls1x-intc";
> >>> -     reg = <0x1fd01040 0x18>;
> >>> -
> >>> -     interrupt-controller;
> >>> -     #interrupt-cells = <2>;
> >>> -
> >>> -     interrupt-parent = <&cpu_intc>;
> >>> -     interrupts = <2>;
> >>> -};
> >>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> >>> new file mode 100644
> >>> index 000000000000..4cea3ee9fbb1
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> >>> @@ -0,0 +1,51 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Loongson-1 Interrupt Controller
> >>
> >> You changed the title, so this binding now will cover all Loonson-1
> >> interrupt controllers?
> >>
> > Yes.
>
> OK, then with the dropped |
>
Sorry.
Should I send the patch V2 to drop the description part?
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
>
>
> Best regards,
> Krzysztof
>


-- 
Best regards,

Kelvin Cheung