Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-oneplus: add alert-slider

[Konrad Dybcio]

On 20.02.2023 01:13, Gergo Koteles wrote:
> The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
> Android maps the states to "silent", "vibrate" and "ring". Expose them as
> ABS_SND_PROFILE events.
> The previous GPIO numbers were wrong. Update them to the correct
> ones.
> 
> Co-developed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> Signed-off-by: Gergo Koteles <soyer@xxxxxx>
> ---
>  .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 43 ++++++++++++++++++-
>  1 file changed, 41 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> index 64638ea94db7..ff982dd853a9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -52,6 +52,45 @@ key-vol-up {
>  		};
>  	};
>  
> +	alert-slider {
This is out of order, alphabetically.

> +		compatible = "gpio-keys";
> +		label = "Alert slider";
> +
> +		pinctrl-0 = <&alert_slider_default>;
> +		pinctrl-names = "default";
> +
> +		switch-top {
> +			label = "Silent";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_SILENT>;
> +			gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
Is there a reason it can't be the default 5ms, since it should
more or less be a simple input ping to the userspace?

Other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> +			linux,can-disable;
> +		};
> +
> +		switch-middle {
> +			label = "Vibrate";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_VIBRATE>;
> +			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
> +			linux,can-disable;
> +
> +		};
> +
> +		switch-bottom {
> +			label = "Ring";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_RING>;
> +			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
> +			linux,can-disable;
> +		};
> +	};
> +
>  	reserved-memory {
>  		/*
>  		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
> @@ -753,8 +792,8 @@ &usb_1_hsphy {
>  &tlmm {
>  	gpio-reserved-ranges = <0 4>, <81 4>;
>  
> -	tri_state_key_default: tri-state-key-default-state {
> -		pins = "gpio40", "gpio42", "gpio26";
> +	alert_slider_default: alert-slider-default-state {
> +		pins = "gpio126", "gpio52", "gpio24";
>  		function = "gpio";
>  		drive-strength = <2>;
>  		bias-disable;