[PATCH 1/2] hwmon: (adt7475) Display smoothing attributes in correct order

From: Tony O'Brien
Date: Sun Feb 19 2023 - 18:30:07 EST


Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2. Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.

Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/adt7475.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 51b3d16c3223..77222c35a38e 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -556,11 +556,11 @@ static ssize_t temp_st_show(struct device *dev, struct device_attribute *attr,
val = data->enh_acoustics[0] & 0xf;
break;
case 1:
- val = (data->enh_acoustics[1] >> 4) & 0xf;
+ val = data->enh_acoustics[1] & 0xf;
break;
case 2:
default:
- val = data->enh_acoustics[1] & 0xf;
+ val = (data->enh_acoustics[1] >> 4) & 0xf;
break;
}

--
2.39.2