Re: [PATCH] mips: Realtek RTL: select NO_EXCEPT_FILL

[Thomas Bogendoerfer]

On Fri, Feb 17, 2023 at 08:27:05PM +0100, Olliver Schinagl wrote:
> It is the Realtek series of SoC, specifically in my case, the RTL9302b,
> which doesn't have a PCI peripherial, at all :) Nor configured in the
> devicetree, but of course generic_mips_kernel enables the drivers, which
> should be noop. I don't see anything related to PCI during boot.
> 
> Having said that, the RTL930x series take their heritage from the RTL819x
> (and probably older) wifi SoC series from realtek, which did contain a PCIe
> peripherial, as that is where the (external) wifi chip was connected too.

I see, and you want to use the already existing wifi driver ?

> > Do you have a programmers manual for it,
> > which contains details about the PCI bridge ?
> 
> If only. There are some (leaked) datasheets, that do contain the PCI
> registers, mostly (obviously) the rtl819x datasheets. https://github.com/libc0607/Realtek_switch_hacking/blob/files/REALTEK-RTL8196E.pdf
> is one such example that contains the PCIe registers.

that's just the PCIe PHY part, but not the localbus<->PCIe bridge
part. But if the wifi part of ypur SOC is directly connected to
the localbus, having the some PCI register won't help anyway.
I am afraid you need to go the route via extra Kconfig section.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]