[PATCH v1 2/4] mfd: qcom-pm8008: Convert irq chip to config regs

From: Aidan MacDonald
Date: Thu Feb 16 2023 - 17:22:49 EST


Replace type and virtual registers, which are both deprecated,
with config registers. This also simplifies the driver because
IRQ types are set in one place, the set_type_config() callback.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
drivers/mfd/qcom-pm8008.c | 50 +++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index 39fd2a792e73..2b6763605cd7 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -66,15 +66,16 @@ static struct regmap_irq_sub_irq_map pm8008_sub_reg_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(p3_offs),
};

-static unsigned int pm8008_virt_regs[] = {
- PM8008_POLARITY_HI_BASE,
- PM8008_POLARITY_LO_BASE,
-};
-
enum {
+ SET_TYPE_INDEX,
POLARITY_HI_INDEX,
POLARITY_LO_INDEX,
- PM8008_NUM_VIRT_REGS,
+};
+
+static unsigned int pm8008_config_regs[] = {
+ PM8008_TYPE_BASE,
+ PM8008_POLARITY_HI_BASE,
+ PM8008_POLARITY_LO_BASE,
};

static struct regmap_irq pm8008_irqs[] = {
@@ -88,32 +89,36 @@ static struct regmap_irq pm8008_irqs[] = {
REGMAP_IRQ_REG(PM8008_IRQ_GPIO2, PM8008_GPIO2, BIT(0)),
};

-static int pm8008_set_type_virt(unsigned int **virt_buf,
- unsigned int type, unsigned long hwirq,
- int reg)
+static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx)
{
switch (type) {
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_LEVEL_LOW:
- virt_buf[POLARITY_HI_INDEX][reg] &= ~pm8008_irqs[hwirq].mask;
- virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask;
+ buf[POLARITY_HI_INDEX][idx] &= ~irq_data->mask;
+ buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
break;

case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_LEVEL_HIGH:
- virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask;
- virt_buf[POLARITY_LO_INDEX][reg] &= ~pm8008_irqs[hwirq].mask;
+ buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
+ buf[POLARITY_LO_INDEX][idx] &= ~irq_data->mask;
break;

case IRQ_TYPE_EDGE_BOTH:
- virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask;
- virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask;
+ buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
+ buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
break;

default:
return -EINVAL;
}

+ if (type & IRQ_TYPE_EDGE_BOTH)
+ buf[SET_TYPE_INDEX][idx] |= irq_data->mask;
+ else
+ buf[SET_TYPE_INDEX][idx] &= ~irq_data->mask;
+
return 0;
}

@@ -121,21 +126,20 @@ static struct regmap_irq_chip pm8008_irq_chip = {
.name = "pm8008_irq",
.main_status = I2C_INTR_STATUS_BASE,
.num_main_regs = 1,
- .num_virt_regs = PM8008_NUM_VIRT_REGS,
.irqs = pm8008_irqs,
.num_irqs = ARRAY_SIZE(pm8008_irqs),
.num_regs = PM8008_NUM_PERIPHS,
.not_fixed_stride = true,
.sub_reg_offsets = pm8008_sub_reg_offsets,
- .set_type_virt = pm8008_set_type_virt,
.status_base = PM8008_STATUS_BASE,
.mask_base = PM8008_MASK_BASE,
.unmask_base = PM8008_UNMASK_BASE,
.mask_unmask_non_inverted = true,
- .type_base = PM8008_TYPE_BASE,
.ack_base = PM8008_ACK_BASE,
- .virt_reg_base = pm8008_virt_regs,
- .num_type_reg = PM8008_NUM_PERIPHS,
+ .config_base = pm8008_config_regs,
+ .num_config_bases = ARRAY_SIZE(pm8008_config_regs),
+ .num_config_regs = PM8008_NUM_PERIPHS,
+ .set_type_config = pm8008_set_type_config,
};

static struct regmap_config qcom_mfd_regmap_cfg = {
@@ -185,11 +189,7 @@ static int pm8008_probe_irq_peripherals(struct device *dev,
for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
type = &pm8008_irqs[i].type;

- type->type_reg_offset = pm8008_irqs[i].reg_offset;
- type->type_rising_val = pm8008_irqs[i].mask;
- type->type_falling_val = pm8008_irqs[i].mask;
- type->type_level_high_val = 0;
- type->type_level_low_val = 0;
+ type->type_reg_offset = pm8008_irqs[i].reg_offset;

if (type->type_reg_offset == PM8008_MISC)
type->types_supported = IRQ_TYPE_EDGE_RISING;
--
2.39.2