[PATCH v3 6/9] arm64: dts: qcom: sa8775p-ride: enable the SPI node

From: Bartosz Golaszewski
Date: Thu Feb 16 2023 - 07:53:25 EST


From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Enable the SPI interface exposed on the sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 5fdce8279537..d01ca3a9ee37 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -14,6 +14,7 @@ / {
aliases {
serial0 = &uart10;
i2c18 = &i2c18;
+ spi16 = &spi16;
};

chosen {
@@ -40,12 +41,25 @@ &sleep_clk {
clock-frequency = <32764>;
};

+&spi16 {
+ pinctrl-0 = <&qup_spi16_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&tlmm {
qup_uart10_default: qup-uart10-state {
pins = "gpio46", "gpio47";
function = "qup1_se3";
};

+ qup_spi16_default: qup-spi16-state {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c18_default: qup-i2c18-state {
pins = "gpio95", "gpio96";
function = "qup2_se4";
--
2.37.2