Re: [RESEND PATCH 03/12] arm64: dts: qcom: sm6350: Supply clock from cpufreq node to CPUs

[Konrad Dybcio]

On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 1e1d366c92c1..c46bb6dab6a1 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -46,6 +46,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -71,6 +72,7 @@ CPU1: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -92,6 +94,7 @@ CPU2: cpu@200 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x200>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -113,6 +116,7 @@ CPU3: cpu@300 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x300>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -134,6 +138,7 @@ CPU4: cpu@400 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x400>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -155,6 +160,7 @@ CPU5: cpu@500 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x500>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -177,6 +183,7 @@ CPU6: cpu@600 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x600>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1894>;
>  			dynamic-power-coefficient = <703>;
> @@ -198,6 +205,7 @@ CPU7: cpu@700 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x700>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1894>;
>  			dynamic-power-coefficient = <703>;
> @@ -2002,6 +2010,7 @@ cpufreq_hw: cpufreq@18323000 {
>  			clock-names = "xo", "alternate";
>  
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  	};
>