Re: [PATCH v3 0/3] StarFive's SDIO/eMMC driver support

[Conor Dooley]

On Wed, Feb 15, 2023 at 06:16:35PM +0800, William Qiu wrote:
> 
> 
> On 2023/2/15 18:00, Emil Renner Berthing wrote:
> > On Tue, 14 Feb 2023 at 13:21, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> >>
> >> On Fri, 3 Feb 2023 at 09:19, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote:
> >> >
> >> > Hi,
> >> >
> >> > This patchset adds initial rudimentary support for the StarFive
> >> > designware mobile storage host controller driver. And this driver will
> >> > be used in StarFive's VisionFive 2 board. The main purpose of adding
> >> > this driver is to accommodate the ultra-high speed mode of eMMC.
> >> >
> >> > The last patch should be applied after the patchset [1]:
> >> > [1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@xxxxxxxxxxxxxxxx/
> >> >
> >> > Changes since v2:
> >> > - Wraped commit message according to Linux coding style.
> >> > - Rephrased the description of the patches.
> >> > - Changed the description of syscon regsiter.
> >> > - Dropped redundant properties.
> >> >
> >> > The patch series is based on v6.1.
> >> >
> >> > William Qiu (3):
> >> >   dt-bindings: mmc: Add StarFive MMC module
> >> >   mmc: starfive: Add sdio/emmc driver support
> >> >   riscv: dts: starfive: Add mmc node
> >> >
> >> >  .../bindings/mmc/starfive,jh7110-mmc.yaml     |  77 ++++++++
> >> >  MAINTAINERS                                   |   6 +
> >> >  .../jh7110-starfive-visionfive-2.dtsi         |  23 +++
> >> >  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  37 ++++
> >> >  drivers/mmc/host/Kconfig                      |  10 +
> >> >  drivers/mmc/host/Makefile                     |   1 +
> >> >  drivers/mmc/host/dw_mmc-starfive.c            | 185 ++++++++++++++++++
> >> >  7 files changed, 339 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
> >> >  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
> >> >
> >>
> >> Patch 1 and patch 2 applied for next, thanks!
> >>
> >> Note that I fixed some checkpatch errors/warnings. Next time, please
> >> run ./scripts/checkpatch.pl before you submit your patches.
> > 
> > Hi,
> > 
> > Something here is not right. The bindings document "starfive,sysreg",
> > but the code is looking for "starfive,syscon".
> > William, did you test this and run dtbs_check before sending this series?
> > 
> > /Emil
> 
> Hi Emil,
> 
> Sorry about that, it's my negligence that I did dtbs_check without

dtbs_check would be okay though, no? The binding and dts (from checking
with eyeballs!) are consistent & it is just the driver that is looking
for the wrong property name, no?

> checking the configuration of CONFIG_SOC_STARFIVE. I made a modification 
> in the next version and add binding for all the syscon at the same time. Next
> time I'll make sure the check is correct.I'm sorry again for this oversight.
> I'll send v4 patch series today.

Ulf's subsystem & his rules, but I would just send a follow-on patch
fixing the driver to use the property that is in the dt-binding.

Sorta unrelated, but please remind me about the dts patch once the base
dts is merged. It's still in the RISC-V patchwork so *should* be fine,
but in case the base dts takes a while it may get automatically
archived.

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature