RE: [PATCH 5/6] clk: samsung: exynos850: Add AUD and HSI main gate clocks

[CHANHO PARK]

> -----Original Message-----
> From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> Sent: Saturday, February 11, 2023 3:40 PM
> To: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>; Chanwoo Choi
> <cw00.choi@xxxxxxxxxxx>; Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>; Rob
> Herring <robh+dt@xxxxxxxxxx>
> Cc: David Virag <virag.david003@xxxxxxxxx>; Chanho Park
> <chanho61.park@xxxxxxxxxxx>; Alim Akhtar <alim.akhtar@xxxxxxxxxxx>; Sumit
> Semwal <sumit.semwal@xxxxxxxxxx>; Tomasz Figa <tomasz.figa@xxxxxxxxx>;
> Michael Turquette <mturquette@xxxxxxxxxxxx>; Stephen Boyd
> <sboyd@xxxxxxxxxx>; linux-samsung-soc@xxxxxxxxxxxxxxx; linux-
> clk@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH 5/6] clk: samsung: exynos850: Add AUD and HSI main gate
> clocks
> 
> Add main gate clocks for controlling AUD and HSI CMUs:
>   - gout_aud_cmu_aud_pclk
>   - gout_hsi_cmu_hsi_pclk
> 
> Those clocks were marked as CLK_IGNORE_UNUSED, as system hangs on boot
> otherwise.
> 
> While at it, add missing PPMU (Performance Profiling Monitor Unit) clocks
> for CMU_HSI.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> ---
>  drivers/clk/samsung/clk-exynos850.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/clk/samsung/clk-exynos850.c
> b/drivers/clk/samsung/clk-exynos850.c
> index a24eff42baae..3d776d57cc8f 100644
> --- a/drivers/clk/samsung/clk-exynos850.c
> +++ b/drivers/clk/samsung/clk-exynos850.c
> @@ -674,6 +674,7 @@ static const struct samsung_cmu_info apm_cmu_info
> __initconst = {
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4	0x2014
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5	0x2018
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6	0x201c
> +#define CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK	0x2020
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_ACLK		0x2048
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY	0x204c
>  #define CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB	0x2050
> @@ -729,6 +730,7 @@ static const unsigned long aud_clk_regs[] __initconst
> = {
>  	CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4,
>  	CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5,
>  	CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6,
> +	CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK,
>  	CLK_CON_GAT_GOUT_AUD_ABOX_ACLK,
>  	CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY,
>  	CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB,
> @@ -848,6 +850,9 @@ static const struct samsung_div_clock aud_div_clks[]
> __initconst = {  };
> 
>  static const struct samsung_gate_clock aud_gate_clks[] __initconst = {
> +	GATE(CLK_GOUT_AUD_CMU_AUD_PCLK, "gout_aud_cmu_aud_pclk",
> +	     "dout_aud_busd",
> +	     CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK, 21, CLK_IGNORE_UNUSED, 0),
>  	GATE(CLK_GOUT_AUD_CA32_CCLK, "gout_aud_ca32_cclk",
> "mout_aud_cpu_hch",
>  	     CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_CA32, 21, 0, 0),
>  	GATE(CLK_GOUT_AUD_ASB_CCLK, "gout_aud_asb_cclk",
> "dout_aud_cpu_aclk", @@ -1117,12 +1122,15 @@ static const struct
> samsung_cmu_info g3d_cmu_info __initconst = {
>  #define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER			0x0610
>  #define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER			0x0620
>  #define CLK_CON_MUX_MUX_CLK_HSI_RTC				0x1000
> +#define CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK			0x2000
>  #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV		0x2008
>  #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50		0x200c
>  #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26		0x2010
>  #define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK			0x2018
>  #define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK			0x2024
>  #define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN			0x2028
> +#define CLK_CON_GAT_GOUT_HSI_PPMU_ACLK				0x202c
> +#define CLK_CON_GAT_GOUT_HSI_PPMU_PCLK				0x2030
>  #define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK			0x2038
>  #define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20	0x203c
>  #define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY		0x2040
> @@ -1132,12 +1140,15 @@ static const unsigned long hsi_clk_regs[]
> __initconst = {
>  	PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
>  	PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
>  	CLK_CON_MUX_MUX_CLK_HSI_RTC,
> +	CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK,
>  	CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
>  	CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
>  	CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
>  	CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
>  	CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
>  	CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
> +	CLK_CON_GAT_GOUT_HSI_PPMU_ACLK,
> +	CLK_CON_GAT_GOUT_HSI_PPMU_PCLK,
>  	CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
>  	CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
>  	CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
> @@ -1163,6 +1174,9 @@ static const struct samsung_mux_clock hsi_mux_clks[]
> __initconst = {  };
> 
>  static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
> +	GATE(CLK_GOUT_HSI_CMU_HSI_PCLK, "gout_hsi_cmu_hsi_pclk",
> +	     "mout_hsi_bus_user",
> +	     CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK, 21, CLK_IGNORE_UNUSED, 0),

You'll need to put /* TODO: */ tag or use CLK_IS_CRITICAL if you make sure it is the critical clock.

>  	GATE(CLK_GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
>  	     CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
>  	GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
> @@ -1177,6 +1191,10 @@ static const struct samsung_gate_clock
> hsi_gate_clks[] __initconst = {
>  	GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
>  	     "mout_hsi_mmc_card_user",
>  	     CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT,
> 0),
> +	GATE(CLK_GOUT_HSI_PPMU_ACLK, "gout_hsi_ppmu_aclk",
> "mout_hsi_bus_user",
> +	     CLK_CON_GAT_GOUT_HSI_PPMU_ACLK, 21, 0, 0),
> +	GATE(CLK_GOUT_HSI_PPMU_PCLK, "gout_hsi_ppmu_pclk",
> "mout_hsi_bus_user",
> +	     CLK_CON_GAT_GOUT_HSI_PPMU_PCLK, 21, 0, 0),
>  	GATE(CLK_GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk",
>  	     "mout_hsi_bus_user",
>  	     CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
> --
> 2.39.1