Re: [PATCH v3 1/2] clk: qcom: camcc-sm6350: add pm_runtime support

[Dmitry Baryshkov]

On Tue, 14 Feb 2023 at 13:01, Luca Weiss <luca.weiss@xxxxxxxxxxxxx> wrote:
>
> Make sure that we can enable and disable the power domains used for
> camcc when the clocks are and aren't used.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
>  drivers/clk/qcom/camcc-sm6350.c | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/qcom/camcc-sm6350.c b/drivers/clk/qcom/camcc-sm6350.c
> index acba9f99d960..fc5532e2ee5b 100644
> --- a/drivers/clk/qcom/camcc-sm6350.c
> +++ b/drivers/clk/qcom/camcc-sm6350.c
> @@ -7,6 +7,8 @@
>  #include <linux/clk-provider.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_clock.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/regmap.h>
>
>  #include <dt-bindings/clock/qcom,sm6350-camcc.h>
> @@ -1869,6 +1871,19 @@ MODULE_DEVICE_TABLE(of, camcc_sm6350_match_table);
>  static int camcc_sm6350_probe(struct platform_device *pdev)
>  {
>         struct regmap *regmap;
> +       int ret;
> +
> +       ret = devm_pm_runtime_enable(&pdev->dev);
> +       if (ret < 0)
> +               return ret;
> +
> +       ret = devm_pm_clk_create(&pdev->dev);
> +       if (ret < 0)
> +               return ret;

This makes me wonder, what is the use for the pm_clk in your case? The
driver doesn't seem to use of_pm_clk_add_clk(), of_pm_clk_add_clks()
or pm_clk_add_clk(). So pm_clk_suspend() and pm_clk_resume() do
nothing.

> +
> +       ret = pm_runtime_get(&pdev->dev);
> +       if (ret)
> +               return ret;
>
>         regmap = qcom_cc_map(pdev, &camcc_sm6350_desc);
>         if (IS_ERR(regmap))
> @@ -1879,14 +1894,22 @@ static int camcc_sm6350_probe(struct platform_device *pdev)
>         clk_agera_pll_configure(&camcc_pll2, regmap, &camcc_pll2_config);
>         clk_fabia_pll_configure(&camcc_pll3, regmap, &camcc_pll3_config);
>
> -       return qcom_cc_really_probe(pdev, &camcc_sm6350_desc, regmap);
> +       ret = qcom_cc_really_probe(pdev, &camcc_sm6350_desc, regmap);
> +       pm_runtime_put(&pdev->dev);
> +
> +       return ret;
>  }
>
> +static const struct dev_pm_ops camcc_pm_ops = {
> +       SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
> +};
> +
>  static struct platform_driver camcc_sm6350_driver = {
>         .probe = camcc_sm6350_probe,
>         .driver = {
>                 .name = "sm6350-camcc",
>                 .of_match_table = camcc_sm6350_match_table,
> +               .pm = &camcc_pm_ops,
>         },
>  };
>
>
> --
> 2.39.1
>


-- 
With best wishes
Dmitry