[PATCH v4 0/2] arm64: qcom: add initial support for qcom sa8775p-ride

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Bjorn,

I'm resending this because it's been discussed with Qualcomm that we need to
drop the watchdog node from the DT. Please don't apply the previous version.

I've also dropped the patches you already have in your tree so these are the
two remaining.

v3 -> v4:
- drop the watchdog node from DT
- drop the watchdog dt-bindings patch
- drop the patches already in Bjorn's tree
- collect tags

v2 -> v3:
- reorder properties (reg always first, etc.)
- tweak node names
- remove properties filled in by the firmware

v1 -> v2:
- lots of improvements all around the place to make the dts pass dtbs_check
  (with some additional patches fixing bugs in existing dt bindings),
  make dtbs W=1 and checkpatch.pl
- move board-specific properties to the board .dts file
- ordered top-level nodes alphabetically and sub-nodes by the reg property
- fixed licensing
- set #address-cells and #size-cells to <2> in the soc node and update sub-nodes

Bartosz Golaszewski (2):
  dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
  arm64: dts: qcom: add initial support for qcom sa8775p-ride

 .../bindings/mailbox/qcom-ipcc.yaml           |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     |  47 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 805 ++++++++++++++++++
 4 files changed, 854 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi

-- 
2.37.2