[PATCH] ata: pata_octeon_cf: drop kernel-doc notation

From: Randy Dunlap
Date: Mon Feb 13 2023 - 16:25:58 EST


Fix a slew of kernel-doc warnings in pata_octeon_cf.c by changing
all "/**" comments to "/*" since they are not in kernel-doc format.

Fixes: 3c929c6f5aa7 ("libata: New driver for OCTEON SOC Compact Flash interface (v7).")
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Link: https://lore.kernel.org/all/202302101722.5O56RClE-lkp@xxxxxxxxx/
Cc: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Cc: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: linux-ide@xxxxxxxxxxxxxxx
---
drivers/ata/pata_octeon_cf.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff -- a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -67,7 +67,7 @@ module_param(enable_dma, int, 0444);
MODULE_PARM_DESC(enable_dma,
"Enable use of DMA on interfaces that support it (0=no dma [default], 1=use dma)");

-/**
+/*
* Convert nanosecond based time to setting used in the
* boot bus timing register, based on timing multiple
*/
@@ -114,7 +114,7 @@ static void octeon_cf_set_boot_reg_cfg(i
cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64);
}

-/**
+/*
* Called after libata determines the needed PIO mode. This
* function programs the Octeon bootbus regions to support the
* timing requirements of the PIO mode.
@@ -278,7 +278,7 @@ static void octeon_cf_set_dmamode(struct
cvmx_write_csr(cf_port->dma_base + DMA_TIM, dma_tim.u64);
}

-/**
+/*
* Handle an 8 bit I/O request.
*
* @qc: Queued command
@@ -317,7 +317,7 @@ static unsigned int octeon_cf_data_xfer8
return buflen;
}

-/**
+/*
* Handle a 16 bit I/O request.
*
* @qc: Queued command
@@ -372,7 +372,7 @@ static unsigned int octeon_cf_data_xfer1
return buflen;
}

-/**
+/*
* Read the taskfile for 16bit non-True IDE only.
*/
static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
@@ -453,7 +453,7 @@ static int octeon_cf_softreset16(struct
return 0;
}

-/**
+/*
* Load the taskfile for 16bit non-True IDE only. The device_addr is
* not loaded, we do this as part of octeon_cf_exec_command16.
*/
@@ -525,7 +525,7 @@ static void octeon_cf_dma_setup(struct a
ap->ops->sff_exec_command(ap, &qc->tf);
}

-/**
+/*
* Start a DMA transfer that was already setup
*
* @qc: Information about the DMA
@@ -580,7 +580,7 @@ static void octeon_cf_dma_start(struct a
cvmx_write_csr(cf_port->dma_base + DMA_CFG, mio_boot_dma_cfg.u64);
}

-/**
+/*
*
* LOCKING:
* spin_lock_irqsave(host lock)