Re: [PATCH v18 5/7] kexec: exclude hot remove cpu from elfcorehdr notes

From: Sourabh Jain
Date: Sun Feb 12 2023 - 23:41:17 EST



On 11/02/23 06:05, Eric DeVolder wrote:


On 2/10/23 00:29, Sourabh Jain wrote:

On 10/02/23 01:09, Eric DeVolder wrote:


On 2/9/23 12:43, Sourabh Jain wrote:
Hello Eric,

On 09/02/23 23:01, Eric DeVolder wrote:


On 2/8/23 07:44, Thomas Gleixner wrote:
Eric!

On Tue, Feb 07 2023 at 11:23, Eric DeVolder wrote:
On 2/1/23 05:33, Thomas Gleixner wrote:

So my latest solution is introduce two new CPUHP states, CPUHP_AP_ELFCOREHDR_ONLINE
for onlining and CPUHP_BP_ELFCOREHDR_OFFLINE for offlining. I'm open to better names.

The CPUHP_AP_ELFCOREHDR_ONLINE needs to be placed after CPUHP_BRINGUP_CPU. My
attempts at locating this state failed when inside the STARTING section, so I located
this just inside the ONLINE sectoin. The crash hotplug handler is registered on
this state as the callback for the .startup method.

The CPUHP_BP_ELFCOREHDR_OFFLINE needs to be placed before CPUHP_TEARDOWN_CPU, and I
placed it at the end of the PREPARE section. This crash hotplug handler is also
registered on this state as the callback for the .teardown method.

TBH, that's still overengineered. Something like this:

bool cpu_is_alive(unsigned int cpu)
{
    struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);

    return data_race(st->state) <= CPUHP_AP_IDLE_DEAD;
}

and use this to query the actual state at crash time. That spares all
those callback heuristics.

I'm making my way though percpu crash_notes, elfcorehdr, vmcoreinfo,
makedumpfile and (the consumer of it all) the userspace crash utility,
in order to understand the impact of moving from for_each_present_cpu()
to for_each_online_cpu().

Is the packing actually worth the trouble? What's the actual win?

Thanks,

         tglx



Thomas,
I've investigated the passing of crash notes through the vmcore. What I've learned is that:

- linux/fs/proc/vmcore.c (which makedumpfile references to do its job) does
  not care what the contents of cpu PT_NOTES are, but it does coalesce them together.

- makedumpfile will count the number of cpu PT_NOTES in order to determine its
  nr_cpus variable, which is reported in a header, but otherwise unused (except
  for sadump method).

- the crash utility, for the purposes of determining the cpus, does not appear to
  reference the elfcorehdr PT_NOTEs. Instead it locates the various
  cpu_[possible|present|online]_mask and computes nr_cpus from that, and also of
  course which are online. In addition, when crash does reference the cpu PT_NOTE,
  to get its prstatus, it does so by using a percpu technique directly in the vmcore
  image memory, not via the ELF structure. Said differently, it appears to me that
  crash utility doesn't rely on the ELF PT_NOTEs for cpus; rather it obtains them
  via kernel cpumasks and the memory within the vmcore.

With this understanding, I did some testing. Perhaps the most telling test was that I
changed the number of cpu PT_NOTEs emitted in the crash_prepare_elf64_headers() to just 1,
hot plugged some cpus, then also took a few offline sparsely via chcpu, then generated a
vmcore. The crash utility had no problem loading the vmcore, it reported the proper number
of cpus and the number offline (despite only one cpu PT_NOTE), and changing to a different
cpu via 'set -c 30' and the backtrace was completely valid.

My take away is that crash utility does not rely upon ELF cpu PT_NOTEs, it obtains the
cpu information directly from kernel data structures. Perhaps at one time crash relied
upon the ELF information, but no more. (Perhaps there are other crash dump analyzers
that might rely on the ELF info?)

So, all this to say that I see no need to change crash_prepare_elf64_headers(). There
is no compelling reason to move away from for_each_present_cpu(), or modify the list for
online/offline.

Which then leaves the topic of the cpuhp state on which to register. Perhaps reverting
back to the use of CPUHP_BP_PREPARE_DYN is the right answer. There does not appear to
be a compelling need to accurately track whether the cpu went online/offline for the
purposes of creating the elfcorehdr, as ultimately the crash utility pulls that from
kernel data structures, not the elfcorehdr.

I think this is what Sourabh has known and has been advocating for an optimization
path that allows not regenerating the elfcorehdr on cpu changes (because all the percpu
structs are all laid out). I do think it best to leave that as an arch choice.

Since things are clear on how the PT_NOTES are consumed in kdump kernel [fs/proc/vmcore.c],
makedumpfile, and crash tool I need your opinion on this:

Do we really need to regenerate elfcorehdr for CPU hotplug events?
If yes, can you please list the elfcorehdr components that changes due to CPU hotplug.
Due to the use of for_each_present_cpu(), it is possible for the number of cpu PT_NOTEs
to fluctuate as cpus are un/plugged. Onlining/offlining of cpus does not impact the
number of cpu PT_NOTEs (as the cpus are still present).


 From what I understood, crash notes are prepared for possible CPUs as system boots and
could be used to create a PT_NOTE section for each possible CPU while generating the elfcorehdr
during the kdump kernel load.

Now once the elfcorehdr is loaded with PT_NOTEs for every possible CPU there is no need to
regenerate it for CPU hotplug events. Or do we?

For onlining/offlining of cpus, there is no need to regenerate the elfcorehdr. However,
for actual hot un/plug of cpus, the answer is yes due to for_each_present_cpu(). The
caveat here of course is that if crash utility is the only coredump analyzer of concern,
then it doesn't care about these cpu PT_NOTEs and there would be no need to re-generate them.

Also, I'm not sure if ARM cpu hotplug, which is just now coming into mainstream, impacts
any of this.

Perhaps the one item that might help here is to distinguish between actual hot un/plug of
cpus, versus onlining/offlining. At the moment, I can not distinguish between a hot plug
event and an online event (and unplug/offline). If those were distinguishable, then we
could only regenerate on un/plug events.

Or perhaps moving to for_each_possible_cpu() is the better choice?

Yes, because once elfcorehdr is built with possible CPUs we don't have to worry about
hot[un]plug case.

Here is my view on how things should be handled if a core-dump analyzer is dependent on
elfcorehdr PT_NOTEs to find online/offline CPUs.

A PT_NOTE in elfcorehdr holds the address of the corresponding crash notes (kernel has
one crash note per CPU for every possible CPU). Though the crash notes are allocated
during the boot time they are populated when the system is on the crash path.

This is how crash notes are populated on PowerPC and I am expecting it would be something
similar on other architectures too.

The crashing CPU sends IPI to every other online CPU with a callback function that updates the
crash notes of that specific CPU. Once the IPI completes the crashing CPU updates its own crash
note and proceeds further.

The crash notes of CPUs remain uninitialized if the CPUs were offline or hot unplugged at the time
system crash. The core-dump analyzer should be able to identify [un]/initialized crash notes
and display the information accordingly.

Thoughts?

- Sourabh

In general, I agree with your points. You've presented a strong case to go with for_each_possible_cpu() in crash_prepare_elf64_headers() and those crash notes would always be present, and we can ignore changes to cpus wrt/ elfcorehdr updates.

But what do we do about kexec_load() syscall? The way the userspace utility works is it determines cpus by:
 nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
which is not the equivalent of possible_cpus. So the complete list of cpu PT_NOTEs is not generated up front. We would need a solution for that?
Hello Eric,

The sysconf document says _SC_NPROCESSORS_CONF is processors configured, isn't that equivalent to possible CPUs?

What exactly sysconf(_SC_NPROCESSORS_CONF) returns on x86? IIUC, on powerPC it is possible CPUs.

In case sysconf(_SC_NPROCESSORS_CONF) is not consistent then we can go with:
/sys/devices/system/cpu/possible for kexec_load case.

Thoughts?

- Sourabh Jain