[PATCH 08/12] pata_parport: use dev_* and print_hex_* instead of printk
From: Ondrej Zary
Date: Sat Feb 11 2023 - 09:43:25 EST
Use dev_info/dev_err/dev_dbg/print_hex_* instead of printk.
Remove version print from log_adapter and meaningless VERSION defines.
Remove now useless verbose parameter of bpck6 module.
Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
drivers/ata/pata_parport/aten.c | 8 ++---
drivers/ata/pata_parport/bpck.c | 31 ++++--------------
drivers/ata/pata_parport/bpck6.c | 56 +++++++-------------------------
drivers/ata/pata_parport/comm.c | 8 ++---
drivers/ata/pata_parport/dstr.c | 8 ++---
drivers/ata/pata_parport/epat.c | 15 +++------
drivers/ata/pata_parport/epia.c | 14 +++-----
drivers/ata/pata_parport/fit2.c | 6 ++--
drivers/ata/pata_parport/fit3.c | 9 ++---
drivers/ata/pata_parport/friq.c | 14 +++-----
drivers/ata/pata_parport/frpw.c | 22 ++++---------
drivers/ata/pata_parport/kbic.c | 8 ++---
drivers/ata/pata_parport/ktti.c | 7 ++--
drivers/ata/pata_parport/on20.c | 8 ++---
drivers/ata/pata_parport/on26.c | 10 ++----
15 files changed, 57 insertions(+), 167 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 3f5c50c2c43a..dbdd89d091df 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -15,8 +15,6 @@
*/
-#define ATEN_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -124,10 +122,8 @@ static void aten_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol aten = {
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 89160a94b30e..d5bc419b2ab3 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -14,8 +14,6 @@
*/
-#define BPCK_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -334,12 +332,9 @@ static int bpck_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
- if (verbose) {
- printk("bpck: 0x%x unit %d mode %d: ",
- pi->port, pi->unit, pi->mode);
- for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
- printk("\n");
- }
+ dev_dbg(&pi->dev, "bpck: 0x%x unit %d mode %d: ",
+ pi->port, pi->unit, pi->mode);
+ print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf, TEST_LEN, false);
e = 0;
for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
@@ -421,24 +416,12 @@ static void bpck_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
"EPP-16","EPP-32" };
char scratch[128];
-#ifdef DUMP_EEPROM
- int i;
-#endif
bpck_read_eeprom(pi,scratch);
-
-#ifdef DUMP_EEPROM
- for(i=0;i<128;i++)
- if ((scratch[i] < ' ') || (scratch[i] > '~'))
- scratch[i] = '.';
- printk("bpck EEPROM: %64.64s\n", scratch);
- printk(" %64.64s\n", &scratch[64]);
-#endif
-
- printk("bpck %s, backpack %8.8s unit %d",
- BPCK_VERSION, &scratch[110], pi->unit);
- printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
+ print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
+ dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+ &scratch[110], pi->unit, pi->port, pi->mode,
+ mode_string[pi->mode], pi->delay);
}
static struct pi_protocol bpck = {
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 41395a97d77c..08dbc1bca4b9 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -19,9 +19,6 @@
Version 2.0.2 - fixed version string usage, and made ppc functions static
*/
-
-#define BACKPACK_VERSION "2.0.2"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -33,10 +30,6 @@
#include "ppc6lnx.c"
#include <linux/pata_parport.h>
-/* PARAMETERS */
-static bool verbose; /* set this to 1 to see debugging messages and whatnot */
-
-
#define PPCSTRUCT(pi) ((Interface *)(pi->private))
/****************************************************************/
@@ -90,10 +83,7 @@ static void bpck6_read_block(struct pi_adapter *pi, char *buf, int len)
static void bpck6_connect(struct pi_adapter *pi)
{
- if(verbose)
- {
- printk(KERN_DEBUG "connect\n");
- }
+ dev_dbg(&pi->dev, "connect\n");
if(pi->mode >=2)
{
@@ -114,22 +104,16 @@ static void bpck6_connect(struct pi_adapter *pi)
static void bpck6_disconnect(struct pi_adapter *pi)
{
- if(verbose)
- {
- printk("disconnect\n");
- }
+ dev_dbg(&pi->dev, "disconnect\n");
ppc6_wr_extout(PPCSTRUCT(pi),0x0);
ppc6_close(PPCSTRUCT(pi));
}
static int bpck6_test_port(struct pi_adapter *pi) /* check for 8-bit port */
{
- if(verbose)
- {
- printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n",
- ((struct pardevice*)(pi->pardev))->port->modes,
- ((struct pardevice *)(pi->pardev))->port->base);
- }
+ dev_dbg(&pi->dev, "PARPORT indicates modes=%x for lp=0x%lx\n",
+ ((struct pardevice *)(pi->pardev))->port->modes,
+ ((struct pardevice *)(pi->pardev))->port->base);
/*copy over duplicate stuff.. initialize state info*/
PPCSTRUCT(pi)->ppc_id=pi->unit;
@@ -158,10 +142,7 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
{
int out;
- if(verbose)
- {
- printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port);
- }
+ dev_dbg(&pi->dev, "PROBE UNIT %x on port:%x\n", pi->unit, pi->port);
/*SET PPC UNIT NUMBER*/
PPCSTRUCT(pi)->ppc_id=pi->unit;
@@ -170,27 +151,17 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
PPCSTRUCT(pi)->mode=1;
out=ppc6_open(PPCSTRUCT(pi));
-
- if(verbose)
- {
- printk(KERN_DEBUG "ppc_open returned %2x\n",out);
- }
+ dev_dbg(&pi->dev, "ppc_open returned %2x\n", out);
if(out)
{
ppc6_close(PPCSTRUCT(pi));
- if(verbose)
- {
- printk(KERN_DEBUG "leaving probe\n");
- }
+ dev_dbg(&pi->dev, "leaving probe\n");
return(1);
}
else
{
- if(verbose)
- {
- printk(KERN_DEBUG "Failed open\n");
- }
+ dev_dbg(&pi->dev, "Failed open\n");
return(0);
}
}
@@ -200,10 +171,8 @@ static void bpck6_log_adapter(struct pi_adapter *pi)
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- BACKPACK_VERSION, pi->port);
- printk("Unit: %d Mode:%d (%s) Delay %d\n",
- pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
+ pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static int bpck6_init_proto(struct pi_adapter *pi)
@@ -215,7 +184,7 @@ static int bpck6_init_proto(struct pi_adapter *pi)
return 0;
}
- printk(KERN_ERR "ERROR COULDN'T ALLOCATE MEMORY\n");
+ dev_err(&pi->dev, "ERROR COULDN'T ALLOCATE MEMORY\n");
return -1;
}
@@ -246,5 +215,4 @@ static struct pi_protocol bpck6 = {
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Micro Solutions Inc.");
MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
-module_param(verbose, bool, 0644);
module_pata_parport_driver(bpck6);
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 88476072b708..8f0b55c1493a 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -14,8 +14,6 @@
*/
-#define COMM_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -183,10 +181,8 @@ static void comm_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol comm = {
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index a8b238828061..c0e44f33ae37 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -13,8 +13,6 @@
*/
-#define DSTR_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -195,10 +193,8 @@ static void dstr_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol dstr = {
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 54b81f785fce..ceeaf36d912d 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -16,8 +16,6 @@
*/
-#define EPAT_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -279,10 +277,8 @@ static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
epat_disconnect(pi);
- if (verbose) {
- printk("epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->port, pi->mode, cc, e[0], e[1], f);
- }
+ dev_dbg(&pi->dev, "epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, cc, e[0], e[1], f);
return (e[0] && e[1]) || f;
}
@@ -298,11 +294,8 @@ static void epat_log_adapter(struct pi_adapter *pi)
ver = RR(0xb);
epat_disconnect(pi);
- printk("epat %s, Shuttle EPAT chip %x at 0x%x, ",
- EPAT_VERSION, ver, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
+ ver, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol epat = {
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index ece7862dc058..8bbe3b2c7634 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -17,8 +17,6 @@
*/
-#define EPIA_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -262,10 +260,8 @@ static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
WR(0x84,0);
epia_disconnect(pi);
- if (verbose) {
- printk("epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], f);
- }
+ dev_dbg(&pi->dev, "epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], f);
return (e[0] && e[1]) || f;
@@ -277,10 +273,8 @@ static void epia_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol epia = {
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 33cdc9bbfff4..a32250c9d042 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -13,8 +13,6 @@
*/
-#define FIT2_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -116,8 +114,8 @@ static void fit2_disconnect(struct pi_adapter *pi)
static void fit2_log_adapter(struct pi_adapter *pi)
{
- printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- FIT2_VERSION, pi->port, pi->delay);
+ dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index d5056b0157ab..cb2771de7c32 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -17,8 +17,6 @@
*/
-#define FIT3_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -173,11 +171,8 @@ static void fit3_log_adapter(struct pi_adapter *pi)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
- printk("fit3 %s, FIT 3000 adapter at 0x%x, "
- "mode %d (%s), delay %d\n",
- FIT3_VERSION, pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol fit3 = {
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index bf597ee520b7..dae26a97ad4f 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -25,8 +25,6 @@
1.01 GRG 1998.12.20 Added support for soft power switch
*/
-#define FRIQ_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -207,10 +205,8 @@ static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
for (k=0;k<128;k++) if (scratch[k] != k) r++;
friq_disconnect(pi);
- if (verbose) {
- printk("friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], r);
- }
+ dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
@@ -221,10 +217,8 @@ static void friq_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
- FRIQ_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
pi->private = 1;
friq_connect(pi);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 9b8db1122154..92b359460e34 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -23,8 +23,6 @@
*/
-#define FRPW_VERSION "1.03"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -230,14 +228,12 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
pi->private = frpw_test_pnp(pi) + 2*pi->port;
if (((pi->private%2) == 0) && (pi->mode > 2)) {
- if (verbose)
- printk("frpw: Xilinx does not support mode %d\n", pi->mode);
+ dev_dbg(&pi->dev, "frpw: Xilinx does not support mode %d\n", pi->mode);
return 1;
}
if (((pi->private%2) == 1) && (pi->mode == 2)) {
- if (verbose)
- printk("frpw: ASIC does not support mode 2\n");
+ dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n");
return 1;
}
@@ -258,10 +254,8 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
for (k=0;k<128;k++) if (scratch[k] != k) r++;
frpw_disconnect(pi);
- if (verbose) {
- printk("frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
- }
+ dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
@@ -272,11 +266,9 @@ static void frpw_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
- printk("frpw %s, Freecom (%s) adapter at 0x%x, ",
- FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
+ ((pi->private % 2) == 0) ? "Xilinx":"ASIC",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol frpw = {
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index db5e2081ed9c..94a3af034cae 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -18,8 +18,6 @@
*/
-#define KBIC_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -234,10 +232,8 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
- printk("kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
+ chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static void k951_log_adapter(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 980da296cac4..5fd4d797720c 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -9,8 +9,6 @@
*/
-#define KTTI_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -93,9 +91,8 @@ static void ktti_disconnect(struct pi_adapter *pi)
static void ktti_log_adapter(struct pi_adapter *pi)
{
- printk("ktti %s, KT adapter at 0x%x, delay %d\n",
- KTTI_VERSION, pi->port, pi->delay);
-
+ dev_info(&pi->dev, "KT adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);
}
static struct pi_protocol ktti = {
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index a3b0708aed71..540b6f842484 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -12,8 +12,6 @@
*/
-#define ON20_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -115,10 +113,8 @@ static void on20_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol on20 = {
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 8dc8296d50e6..4ec1091ae6a7 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -16,8 +16,6 @@
*/
-#define ON26_VERSION "1.04"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -167,7 +165,7 @@ static int on26_test_port(struct pi_adapter *pi) /* hard reset */
}
if (i == RESET_WAIT)
- printk("on26: Device reset failed (%x,%x)\n",x,y);
+ dev_err(&pi->dev, "on26: Device reset failed (%x,%x)\n", x, y);
w0(4); P1; w0(4); P1;
}
@@ -280,10 +278,8 @@ static void on26_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol on26 = {
--
Ondrej Zary