[PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits

From: Alain Volmat
Date: Fri Feb 10 2023 - 17:44:03 EST


This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat <avolmat@xxxxxx>
---
drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
1 file changed, 10 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5c..e30305b77f0d 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@

#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)

static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 val;

/* Waiting for Compensation to complete */
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
- if (time_after_eq(jiffies, finish))
- return -EBUSY;
- cpu_relax();
- } while (!(val & COMP_DONE));
-
- return 0;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+ val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
}


@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)

static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 mask = HFC_PLL | HFC_RDY;
u8 val;

@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->type == PHY_TYPE_SATA)
mask |= PHY_RDY;

- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
- if ((val & mask) != mask)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+ val, (val & mask) == mask, 1,
+ 5 * USEC_PER_SEC);
}

static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
{
struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
- unsigned long finish = jiffies + 5 * HZ;
u32 val;

if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
return -EINVAL;

- do {
- regmap_read(miphy_dev->regmap,
- miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
- if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return regmap_read_poll_timeout(miphy_dev->regmap,
+ miphy_phy->syscfg_reg[SYSCFG_STATUS],
+ val, val & MIPHY_OSC_RDY, 1,
+ 5 * USEC_PER_SEC);
}

static int miphy28lp_get_resource_byname(struct device_node *child,
--
2.34.1