Re: [PATCH v2 05/11] arm64: dts: qcom: sm8350: add port subnodes in dwc3 node

[Konrad Dybcio]

On 10.02.2023 16:02, Neil Armstrong wrote:
> Add ports subnodes in dwc3 node to avoid repeating the
> same description in each board DT.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 0a422637b61f..3f4631e06187 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -2727,6 +2727,25 @@ usb_1_dwc3: usb@a600000 {
>  				snps,dis_enblslpm_quirk;
>  				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
>  				phy-names = "usb2-phy", "usb3-phy";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +
> +						usb_1_dwc3_hs: endpoint {
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +
> +						usb_1_dwc3_ss: endpoint {
> +						};
> +					};
> +				};
>  			};
>  		};
>  
>