[PATCH V2 2/2] arm64: dts: qcom: ipq5332: add SMEM support

[Kathiravan T]

Add SMEM support by adding required nodes.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
Changes in V2:
	- Rebased on V4 series of baseport patches
	  https://lore.kernel.org/linux-arm-msm/20230208155232.11500-1-quic_kathirav@xxxxxxxxxxx/

 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index ad6481dd57ba..0eaf6a5a3da6 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -99,6 +99,14 @@
 			reg = <0x0 0x4a600000 0x0 0x200000>;
 			no-map;
 		};
+
+		smem@4a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4a800000 0x0 0x00100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 0>;
+		};
 	};
 
 	soc@0 {
@@ -143,6 +151,12 @@
 				 <0>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		tcsr: syscon@1937000 {
 			compatible = "qcom,tcsr-ipq5332", "syscon";
 			reg = <0x01937000 0x21000>;
-- 
2.17.1