Re: [PATCH v2 1/2] dt: bindings: add dt entry for XO calibration support

[Krzysztof Kozlowski]

On 31/01/2023 15:03, Youghandhar Chintala wrote:
> Add dt binding to get XO calibration data support for Wi-Fi RF clock.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
Hint: dt-bindings: net: qcom,ath11k:

> 
> Signed-off-by: Youghandhar Chintala <quic_youghand@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> index f7cf135aa37f..205ee949daba 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -41,6 +41,10 @@ properties:
>          * reg
>          * reg-names
>  
> +  xo-cal-data:
> +    description:
> +      XO cal offset to be configured in XO trim register

Missing type. I also do not understand what's this and why some register
offset should be stored in DT. Please give us some justification why
this is suitable for DT.

Best regards,
Krzysztof