[PATCH v2 1/2] dt-bindings: improve wb,mbl-gpio binding documentation.

[Niall Leonard via B4 Submission Endpoint]

From: Niall Leonard <nl250060@xxxxxxx>

Convert existing wd,mbl-gpio binding documentation to YAML and add
new optional propery "no-input".

Signed-off-by: Niall Leonard <nl250060@xxxxxxx>
---
 .../devicetree/bindings/gpio/wd,mbl-gpio.txt       | 38 -----------
 .../devicetree/bindings/gpio/wd,mbl-gpio.yaml      | 78 ++++++++++++++++++++++
 2 files changed, 78 insertions(+), 38 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
deleted file mode 100644
index 038c3a6a1f4d..000000000000
--- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers.
-
-The Western Digital MyBook Live has two memory-mapped GPIO controllers.
-Both GPIO controller only have a single 8-bit data register, where GPIO
-state can be read and/or written.
-
-Required properties:
-	- compatible: should be "wd,mbl-gpio"
-	- reg-names: must contain
-		"dat" - data register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- no-output: GPIOs are read-only.
-
-Examples:
-	gpio0: gpio0@e0000000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0000000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	gpio1: gpio1@e0100000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0100000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		no-output;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.yaml b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.yaml
new file mode 100644
index 000000000000..d1c72a42c5bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/wd,mbl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Western Digital's MyBook Live memory-mapped GPIO controllers.
+
+maintainers:
+  - Niall Leonard <nl250060@xxxxxxx>
+
+description: |+
+  Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers.
+
+  The Western Digital MyBook Live has two memory-mapped GPIO controllers.
+  Both GPIO controller only have a single 8-bit data register, where GPIO
+  state can be read and/or written.
+
+properties:
+  compatible:
+    enum:
+      - wd,mbl-gpio
+
+  reg-names:
+    items:
+      - const: dat
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  no-output:
+    description: GPIOs are read-only.
+
+  no-input:
+    description: GPIOs are write-only.
+
+required:
+  - compatible
+  - reg-names
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio0@e0000000 {
+        compatible = "wd,mbl-gpio";
+        reg-names = "dat";
+        reg = <0xe0000000 0x1>;
+        #gpio-cells = <2>;
+        gpio-controller;
+    };
+
+    gpio1: gpio1@e0100000 {
+        compatible = "wd,mbl-gpio";
+        reg-names = "dat";
+        reg = <0xe0100000 0x1>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        no-output;
+    };
+
+    gpio2: gpio1@e0200000 {
+        compatible = "wd,mbl-gpio";
+        reg-names = "dat";
+        reg = <0xe0200000 0x1>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        no-input;
+    };
+

-- 
2.34.1