Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)

[Darrell Kavanagh]

On Mon, 30 Jan 2023 at 17:35, Jonathan Cameron
<Jonathan.Cameron@xxxxxxxxxx> wrote:

> That certainly looks like suitable matrix.
>
> If we are lucky it matches the handling in bmc150-accel-core.c for an identically
> named method.  That is going to swap the x and y axis which is I'd have thought would
> be rather bad if what you have is currently working well.
>

Actually, that would be good, because at present I have to rotate 90
degrees in my grub command line.

Darrell

> >             }
> >
> >             Method (PRIM, 0, NotSerialized)
> >             {
> >                 Name (RBUF, Buffer (One)
> >                 {
> >                      0x01                                             // .
> >                 })
> >                 Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.PRIM.RBUF */
> >             }
> >
> >             Method (_STA, 0, NotSerialized)  // _STA: Status
> >             {
> >                 If ((GAVT == 0x6A))
> >                 {
> >                     Return (0x0F)
> >                 }
> >                 Else
> >                 {
> >                     Return (Zero)
> >                 }
> >             }
> >
> >             Method (CALS, 1, NotSerialized)
> >             {
> >                 Local0 = Arg0
> >                 If (((Local0 == Zero) || (Local0 == Ones)))
> >                 {
> >                     Local0 = BAC1 /* \BAC1 */
> >                     Return (Local0)
> >                 }
> >                 Else
> >                 {
> >                     BAC1 = Local0
> >                     BACS = Local0
> >                     BSCA (0xB0)
> >                 }
> >             }
> >         }
> >     }
> >
> >
> > Thanks,
> > Darrell
> >
> > On Mon, 30 Jan 2023 at 12:31, Jonathan Cameron
> > <Jonathan.Cameron@xxxxxxxxxx> wrote:
> > >
> > > On Mon, 30 Jan 2023 03:37:23 +0000
> > > Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx> wrote:
> > >
> > > > Forwarding because original html messages were rejected by the server...
> > > >
> > > > ---------- Forwarded message ---------
> > > > From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
> > > > Date: Mon, 30 Jan 2023 at 02:52
> > > > Subject: Re: Bug#1029850: linux: Driver not loaded for ST
> > > > Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
> > > > To: Jonathan Cameron <jic23@xxxxxxxxxx>
> > > > Cc: <lorenzo@xxxxxxxxxx>, <lars@xxxxxxxxxx>,
> > > > <linux-iio@xxxxxxxxxxxxxxx>, <linux-kernel@xxxxxxxxxxxxxxx>,
> > > > <carnil@xxxxxxxxxx>
> > > >
> > > >
> > > > Hi Jonathan,
> > > >
> > > > Thank you. The driver has evolved quite a bit in 6.2 (I read somewhere
> > > > that 6.2 includes some i2c enhancements), but I adapted your changes
> > > > to fit my Debian 6.1 kernel and it works. Two IIO devices are created
> > > > in sysfs, iio-sensor-proxy.service starts up and automatic screen
> > > > rotation in Gnome just works.
> > > >
> > > > To get the modules to load on boot, I made a small change to your code
> > > > in st_lsm6dsx_i2c to add the acpi alias to modules.alias:
> > > >
> > > > adding a null element to st_lsm6dsx_i2c_acpi_match:
> > > >     static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
> > > >          { "SMO8B30", ST_LSM6DS3TRC_ID, },
> > > >          { },
> > > >     };
> > > > then:
> > > >    MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
> > >
> > > doh! That was indeed sloppy of me to miss even for an untested hack.
> > >
> > >
> > >
> > > >
> > > >
> > > > dmesg shows:
> > > >
> > > > [ 7366.120208] st_lsm6dsx_i2c i2c-SMO8B30:00: supply vdd not found,
> > > > using dummy regulator
> > > > [ 7366.120260] st_lsm6dsx_i2c i2c-SMO8B30:00: supply vddio not found,
> > > > using dummy regulator
> > > > [ 7366.650839] st_lsm6dsx_i2c i2c-SMO8B30:00: mounting matrix not
> > > > found: using identity...
> > > >
> > > > Is this a problem?
> > >
> > > Those are all fine. For regulators that's expected on ACPI and should
> > > be harmless as it's up to the firmware to manage power (in DT it may
> > > be up to the kernel).
> > > For the mounting matrix, there is often something in ACPI DSDT
> > > (non standard though).  Could you
> > > cat /sys/firmware/acpi/tables/DSDT > ~/dsdt
> > > then run through iasl from acpitools
> > > iasl -d ~/dsdt
> > > and find the bit related to this device.
> > >
> > > If you can then share that there may be a _DSM or similar in there that
> > > is effectively the mounting matrix.  If we are lucky it will look like
> > > some existing versions we have code to handle and can add that support
> > > as well.
> > >
> > > Either way - I'll spin a formal patch with your fixes above and we can
> > > get this upstream for future kernels.  Mounting matrix can follow
> > > later if needed.
> > >
> > > Thanks,
> > >
> > > Jonathan
> > >
> > >
> > > >
> > > > Thanks again.
> > > >
> > > > Darrell
> > > >
> > > >
> > > > On Sun, 29 Jan 2023 at 18:10, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Sun, 29 Jan 2023 17:03:51 +0000
> > > > > Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx> wrote:
> > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I raised this bug in Debian, and have been asked to raise it upstream and
> > > > > > was given your addresses to do so. Will this email be OK, or should I raise
> > > > > > it in a bug tracking system somewhere?
> > > > >
> > > > > Email is the right option.
> > > > >
> > > > > >
> > > > > > Many thanks,
> > > > > > Darrell
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > ---------- Forwarded message ---------
> > > > > > From: Salvatore Bonaccorso <carnil@xxxxxxxxxx>
> > > > > > Date: Sat, 28 Jan 2023 at 20:33
> > > > > > Subject: Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics
> > > > > > LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
> > > > > > To: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>, <1029850@xxxxxxxxxxxxxxx>
> > > > > >
> > > > > >
> > > > > > Hi Darrell,
> > > > > >
> > > > > > On Sat, Jan 28, 2023 at 08:13:16PM +0000, Darrell Kavanagh wrote:
> > > > > > > Package: src:linux
> > > > > > > Version: 6.1.4-1
> > > > > > > Severity: normal
> > > > > > > File: linux
> > > > > > > X-Debbugs-Cc: darrell.kavanagh@xxxxxxxxx
> > > > > > >
> > > > > > > Dear Maintainer,
> > > > > > >
> > > > > > > This is a convertable touchscreen tablet/laptop. The rotation sensor
> > > > > > device
> > > > > > > ST Microelectronics LSM6DS3TR-C does not work. It is detected via ACPI
> > > > > > and the
> > > > > > > sysfs trees are created at
> > > > > > devices/pci0000:00/0000:00:17.1/i2c_designware.3/i2c-4/i2c-SMO8B30:00
> > > > > > > and devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/SMO8B30:00 with
> > > > > > > symlinks bus/acpi/devices/SMO8B30:00 and bus/i2c/devices/i2c-SMO8B30:00,
> > > > > > but
> > > > > > > no driver is loaded.
> > > > >
> > > > > At least this is using the ST PNP ID which is better than average
> > > > > (long story!)
> > > > >
> > > > > The driver in question (ultimately drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > > > > does not currently have an ACPI support.  It should be straight forwards
> > > > > to add though the driver first needs converting to use
> > > > > device_get_match_data() with appropriate fallback so that it will match on
> > > > > ACPI, OF or original spi_device_id tables
> > > > >
> > > > > Completely untested but something like the following
> > > > > (the offset in the enum is needed to allow us to tell if we got a result when
> > > > > calling device_get_match_data() as it returns NULL on failure IIRC)
> > > > >
> > > > > I'm not sure how sucessful the driver will be at finding any interrupts etc, but
> > > > > it may get you basic functionality.
> > > > >
> > > > > Good luck and others more familiar with the driver may well tell me what I forgot
> > > > > when hacking the below ;)
> > > > >
> > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > > > > index 499fcf8875b4..2617ce236ddc 100644
> > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > > > > @@ -39,7 +39,7 @@
> > > > >  #define ST_ISM330IS_DEV_NAME   "ism330is"
> > > > >
> > > > >  enum st_lsm6dsx_hw_id {
> > > > > -       ST_LSM6DS3_ID,
> > > > > +       ST_LSM6DS3_ID = 1,
> > > > >         ST_LSM6DS3H_ID,
> > > > >         ST_LSM6DSL_ID,
> > > > >         ST_LSM6DSM_ID,
> > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > > > > index df5f60925260..ecfceb2fb3db 100644
> > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > > > > @@ -23,10 +23,15 @@ static const struct regmap_config st_lsm6dsx_i2c_regmap_config = {
> > > > >
> > > > >  static int st_lsm6dsx_i2c_probe(struct i2c_client *client)
> > > > >  {
> > > > > -       const struct i2c_device_id *id = i2c_client_get_device_id(client);
> > > > > -       int hw_id = id->driver_data;
> > > > > +       int hw_id;
> > > > >         struct regmap *regmap;
> > > > >
> > > > > +       hw_id = (kernel_ulong_t)device_get_match_data(&client->dev);
> > > > > +       if (!hw_id)
> > > > > +               hw_id = i2c_client_get_device_id(client)->driver_data;
> > > > > +       if (!hw_id)
> > > > > +               return -EINVAL;
> > > > > +
> > > > >         regmap = devm_regmap_init_i2c(client, &st_lsm6dsx_i2c_regmap_config);
> > > > >         if (IS_ERR(regmap)) {
> > > > >                 dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
> > > > > @@ -129,6 +134,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
> > > > >  };
> > > > >  MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
> > > > >
> > > > > +static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
> > > > > +       { "SMO8B30", ST_LSM6DS3TRC_ID, },
> > > > > +};
> > > > > +
> > > > >  static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
> > > > >         { ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
> > > > >         { ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID },
> > > > > @@ -161,6 +170,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
> > > > >                 .name = "st_lsm6dsx_i2c",
> > > > >                 .pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
> > > > >                 .of_match_table = st_lsm6dsx_i2c_of_match,
> > > > > +               .acpi_match_table = st_lsm6dsx_i2c_acpi_match,
> > > > >         },
> > > > >         .probe_new = st_lsm6dsx_i2c_probe,
> > > > >         .id_table = st_lsm6dsx_i2c_id_table,
> > > > >
> > > > >
> > > > > > >
> > > > > > > The device is identifying itself to the kernel with PNP id SMO8B30:
> > > > > > > physical_node:
> > > > > > >       modalias=acpi:SMO8B30:SMO8B30:
> > > > > > >       name=SMO8B30:00
> > > > > > >       uevent=MODALIAS=acpi:SMO8B30:SMO8B30:
> > > > > > >       waiting_for_supplier=0
> > > > > > > firmware_node:
> > > > > > >       hid=SMO8B30
> > > > > > >       modalias=acpi:SMO8B30:SMO8B30:
> > > > > > >       path=\_SB_.PCI0.I2C5.DEV_
> > > > > > >       status=15
> > > > > > >       uevent=MODALIAS=acpi:SMO8B30:SMO8B30:
> > > > > > >       uid=0
> > > > > > >
> > > > > > > The kernel module for the appropriate driver (st_lsm6dsx_i2c) is not
> > > > > > loaded on boot.
> > > > > > > Modprobing it does not associate it with the device, as I would expect as
> > > > > > > the module does not provide an alias for the above acpi/pnp id.
> > > > > >
> > > > > > Can you report this issue upstream? Gues to reach out are according to
> > > > > > get_maintainers.pl script:
> > > > > >
> > > > > > Lorenzo Bianconi <lorenzo@xxxxxxxxxx> (maintainer:ST LSM6DSx IMU IIO DRIVER)
> > > > > > Jonathan Cameron <jic23@xxxxxxxxxx> (maintainer:IIO SUBSYSTEM AND DRIVERS)
> > > > > > Lars-Peter Clausen <lars@xxxxxxxxxx> (reviewer:IIO SUBSYSTEM AND DRIVERS)
> > > > > > linux-iio@xxxxxxxxxxxxxxx (open list:ST LSM6DSx IMU IIO DRIVER)
> > > > > > linux-kernel@xxxxxxxxxxxxxxx (open list)
> > > > > >
> > > > > > Please keep us in the loop.
> > > > > >
> > > > > > Regards,
> > > > > > Salvatore
> > > > >
> > >
>