[PATCH] dt-bindings: watchdog: qcom-wdt: add the interrupts property

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

The interrupts property is used in all nodes using this binding but not
defined in the document itself - hence dtbs_check fails for them. Add
the property and update the example.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 .../devicetree/bindings/watchdog/qcom-wdt.yaml        | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index 27fb484d5f8d..45940d643b92 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -46,6 +46,10 @@ properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    minItems: 1
+    maxItems: 5
+
 required:
   - compatible
   - reg
@@ -55,9 +59,16 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     watchdog@208a038 {
       compatible = "qcom,kpss-wdt-ipq8064";
       reg = <0x0208a038 0x40>;
       clocks = <&sleep_clk>;
       timeout-sec = <10>;
+      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
     };
-- 
2.37.2