Re: [RFT PATCH v3 1/4] ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250

From: Marek Szyprowski
Date: Fri Jan 27 2023 - 17:02:08 EST


On 27.01.2023 22:27, Krzysztof Kozlowski wrote:
> Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
> which do not have unit address. Therefore usethe address space
> of child device (actual DWC3 Controller) as the wrapper's address to
> fix:
>
> exynos5250-smdk5250.dtb: soc: usb3: {'compatible': ['samsung,exynos5250-dwusb3'],
> ... } should not be valid under {'type': 'object'}
>
> exynos5250.dtsi:638.16-653.5: Warning (simple_bus_reg): /soc/usb3: missing or empty reg/ranges property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> 1. Use ranges with values and drop reg from usb-wrapper node.
> 2. Keep "usb" as wrapper's node name.
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 97e89859ba3d..a5db4ac213d5 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -635,17 +635,17 @@ i2s2: i2s@12d70000 {
> #sound-dai-cells = <1>;
> };
>
> - usbdrd: usb3 {
> + usbdrd: usb@12000000 {
> compatible = "samsung,exynos5250-dwusb3";
> clocks = <&clock CLK_USB3>;
> clock-names = "usbdrd30";
> #address-cells = <1>;
> #size-cells = <1>;
> - ranges;
> + ranges = <0x0 0x12000000 0x10000>;
>
> - usbdrd_dwc3: usb@12000000 {
> + usbdrd_dwc3: usb@0 {
> compatible = "snps,dwc3";
> - reg = <0x12000000 0x10000>;
> + reg = <0x0 0x10000>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
> phy-names = "usb2-phy", "usb3-phy";

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland