[PATCH v2] dt-bindings: usb: samsung,exynos-dwc3: allow unit address in DTS

[Krzysztof Kozlowski]

The Samsung Exynos SoC USB 3.0 DWC3 Controller is a simple wrapper of
actual DWC3 Controller device node.  It handles necessary Samsung
Exynos-specific resources (regulators, clocks), but does not have its
own MMIO address space.

However neither simple-bus bindings nor dtc W=1 accept device nodes in
soc@ node which do not have unit address.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v1:
1. Use ranges with values and drop reg from usb-wrapper node.
2. Keep "usb" as wrapper's node name.

DTS fixes are here:
https://lore.kernel.org/linux-samsung-soc/20230127211527.260060-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t
---
 .../devicetree/bindings/usb/samsung,exynos-dwc3.yaml      | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
index 6b9a3bcb3926..42ceaf13cd5d 100644
--- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -108,19 +108,19 @@ examples:
     #include <dt-bindings/clock/exynos5420.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    usb {
+    usb@12000000 {
         compatible = "samsung,exynos5250-dwusb3";
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges;
+        ranges = <0x0 0x12000000 0x10000>;
         clocks = <&clock CLK_USBD300>;
         clock-names = "usbdrd30";
         vdd33-supply = <&ldo9_reg>;
         vdd10-supply = <&ldo11_reg>;
 
-        usb@12000000 {
+        usb@0 {
             compatible = "snps,dwc3";
-            reg = <0x12000000 0x10000>;
+            reg = <0x0 0x10000>;
             interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
             phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
             phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1