[PATCH v9 3/5] thermal: mediatek: add support for MT8365 SoC

From: Amjad Ouled-Ameur
Date: Fri Jan 27 2023 - 10:46:11 EST


From: Fabien Parent <fparent@xxxxxxxxxxxx>

MT8365 is similar to the other SoCs supported by the driver. It has only
one bank and 3 actual sensors that can be multiplexed. There is another
one sensor that does not have usable data.

Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
drivers/thermal/mtk_thermal.c | 68 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index d8ddceb75372..3a5df1440822 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -31,6 +31,7 @@
#define AUXADC_CON2_V 0x010
#define AUXADC_DATA(channel) (0x14 + (channel) * 4)

+#define APMIXED_SYS_TS_CON0 0x600
#define APMIXED_SYS_TS_CON1 0x604

/* Thermal Controller Registers */
@@ -245,6 +246,17 @@ enum mtk_thermal_version {
/* The calibration coefficient of sensor */
#define MT8183_CALIBRATION 153

+/* MT8365 */
+#define MT8365_TEMP_AUXADC_CHANNEL 11
+#define MT8365_CALIBRATION 164
+#define MT8365_NUM_CONTROLLER 1
+#define MT8365_NUM_BANKS 1
+#define MT8365_NUM_SENSORS 3
+#define MT8365_NUM_SENSORS_PER_ZONE 3
+#define MT8365_TS1 0
+#define MT8365_TS2 1
+#define MT8365_TS3 2
+
struct mtk_thermal;

struct thermal_bank_cfg {
@@ -389,6 +401,24 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };

+/* MT8365 thermal sensor data */
+static const int mt8365_bank_data[MT8365_NUM_SENSORS] = {
+ MT8365_TS1, MT8365_TS2, MT8365_TS3
+};
+
+static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 };
+static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 };
+
+static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 };
+
/*
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -463,6 +493,40 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
.version = MTK_THERMAL_V1,
};

+/*
+ * The MT8365 thermal controller has one bank, which can read up to
+ * four temperature sensors simultaneously. The MT8365 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt8365_thermal_data = {
+ .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT8365_NUM_BANKS,
+ .num_sensors = MT8365_NUM_SENSORS,
+ .vts_index = mt8365_vts_index,
+ .cali_val = MT8365_CALIBRATION,
+ .num_controller = MT8365_NUM_CONTROLLER,
+ .controller_offset = mt8365_tc_offset,
+ .need_switch_bank = false,
+ .bank_data = {
+ {
+ .num_sensors = MT8365_NUM_SENSORS,
+ .sensors = mt8365_bank_data
+ },
+ },
+ .msr = mt8365_msr,
+ .adcpnp = mt8365_adcpnp,
+ .sensor_mux_values = mt8365_mux_values,
+ .version = MTK_THERMAL_V1,
+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0,
+ .apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28),
+ .apmixed_buffer_ctl_set = 0,
+};
+
/*
* The MT2712 thermal controller has one bank, which can read up to
* four temperature sensors simultaneously. The MT2712 has a total of 4
@@ -964,6 +1028,10 @@ static const struct of_device_id mtk_thermal_of_match[] = {
{
.compatible = "mediatek,mt8183-thermal",
.data = (void *)&mt8183_thermal_data,
+ },
+ {
+ .compatible = "mediatek,mt8365-thermal",
+ .data = (void *)&mt8365_thermal_data,
}, {
},
};

--
2.39.1