[PATCH v2 0/5] arm64: dts: meson: fix BPI-M5 and add BPI-M2-PRO

[Christian Hewitt]

The first patch in this series fixes an SD card (re)boot issue on the
BPI-M5. The second removes a redundant status from the sound node so
we don't carry it forward when subsequent patches convert the (fixed)
dts into a common dtsi, then add support for BPI-M2-PRO which is based
on the BPI-M5 board design.

Changes from v1:

- Added patch to remove sound node status in meson-sm1-bananapi-m5.dts 
- Added Krzysztof's ack to bindings patch
- Revised meson-sm1-bananapi-m2-pro.dts to remove sound node status
- Minor wording changes

Christian Hewitt (5):
  arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
  arm64: dts: meson: bananapi-m5: remove redundant status from sound
    node
  arm64: dts: meson: bananapi-m5: convert dts to dtsi
  dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
  arm64: dts: meson: add support for BananaPi M2-Pro

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-sm1-bananapi-m2-pro.dts |  97 ++++
 .../dts/amlogic/meson-sm1-bananapi-m5.dts     | 428 +----------------
 .../boot/dts/amlogic/meson-sm1-bananapi.dtsi  | 435 ++++++++++++++++++
 5 files changed, 535 insertions(+), 427 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi

-- 
2.34.1