Re: [PATCH V1 7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support

[Devi Priya]

On 1/26/2023 5:10 AM, Konrad Dybcio wrote:
> On 25.01.2023 12:12, Devi Priya wrote:
> > On 1/24/2023 8:44 PM, Krzysztof Kozlowski wrote:
> > > On 24/01/2023 15:15, devi priya wrote:
> > > > From: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
> > > >
> > > > Add initial device tree support for Qualcomm IPQ9574 SoC
> > > > and AL02 board
> > > >
> > > > Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> > > > Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> > > > Co-developed-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> > > > Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> > > > Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
> > > > ---
> > > >    arch/arm64/boot/dts/qcom/Makefile            |   1 +
> > > >    arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
> > > >    arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
> > > >    3 files changed, 364 insertions(+)
> > > >    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > > >    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > > > index 3e79496292e7..872c62028a0b 100644
> > > > --- a/arch/arm64/boot/dts/qcom/Makefile
> > > > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > > > @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
> > > >    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
> > > >    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
> > > >    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c2.dtb
> > > > +dtb-$(CONFIG_ARCH_QCOM)    += ipq9574-al02-c7.dtb
> > > >    dtb-$(CONFIG_ARCH_QCOM)    += msm8916-alcatel-idol347.dtb
> > >
> > > This does not match current tree, so I could not apply it for tests. I
> > > think you based it on a bit older version.
> > The patch series is based on Linux 6.2-rc1 and not the qcom/for-next branch.
> Linux 6.2-rc1 is very old already and Bjorn has already picked
> tens of patches atop it, so yours will not apply unless you
> base it on qcom/for-next (or just linux-next for that matter).
Sure got it. Will post V3 based on linux-next
> Konrad
> > > Best regards,
> > > Krzysztof
> > Best Regards,
> > Devi Priya