Re: [PATCH 31/35] Documentation: trace: correct spelling

[Mukesh Ojha]

On 1/27/2023 12:10 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
> Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
> Cc: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
> Cc: linux-trace-kernel@xxxxxxxxxxxxxxx
> Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> Cc: coresight@xxxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Cc: linux-doc@xxxxxxxxxxxxxxx
> ---
>   Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>   Documentation/trace/events.rst                              |    6 +++---
>   Documentation/trace/fprobe.rst                              |    2 +-
>   Documentation/trace/ftrace-uses.rst                         |    2 +-
>   Documentation/trace/hwlat_detector.rst                      |    2 +-
>   Documentation/trace/rv/runtime-verification.rst             |    2 +-
>   Documentation/trace/uprobetracer.rst                        |    2 +-
>   7 files changed, 9 insertions(+), 9 deletions(-)
>
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
>       reconstructed using only conditional branches.
>   
>       There is currently no support in Perf for supplying modified binaries to the decoder, so this
> -    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> +    feature is only intended to be used for debugging purposes or with a 3rd party tool.
>   
>       Choosing this option will result in a significant increase in the amount of trace generated -
>       possible danger of overflows, or fewer instructions covered. Note, that this option also
> diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
> --- a/Documentation/trace/events.rst
> +++ b/Documentation/trace/events.rst
> @@ -903,7 +903,7 @@ functions can be used.
>   
>   To create a kprobe event, an empty or partially empty kprobe event
>   should first be created using kprobe_event_gen_cmd_start().  The name
> -of the event and the probe location should be specfied along with one
> +of the event and the probe location should be specified along with one
>   or args each representing a probe field should be supplied to this
>   function.  Before calling kprobe_event_gen_cmd_start(), the user
>   should create and initialize a dynevent_cmd object using
> @@ -983,7 +983,7 @@ The basic idea is simple and amounts to
>   layer that can be used to generate trace event commands.  The
>   generated command strings can then be passed to the command-parsing
>   and event creation code that already exists in the trace event
> -subystem for creating the corresponding trace events.
> +subsystem for creating the corresponding trace events.
>   
>   In a nutshell, the way it works is that the higher-level interface
>   code creates a struct dynevent_cmd object, then uses a couple
> @@ -1056,7 +1056,7 @@ to add an operator between the pair (her
>   appended onto the end of the arg pair (here ';').
>   
>   There's also a dynevent_str_add() function that can be used to simply
> -add a string as-is, with no spaces, delimeters, or arg check.
> +add a string as-is, with no spaces, delimiters, or arg check.
>   
>   Any number of dynevent_*_add() calls can be made to build up the string
>   (until its length surpasses cmd->maxlen).  When all the arguments have
> diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
> --- a/Documentation/trace/fprobe.rst
> +++ b/Documentation/trace/fprobe.rst
> @@ -111,7 +111,7 @@ saved at function entry and passed to ex
>           the instruction pointer of @regs may be different from the @entry_ip
>           in the entry_handler. If you need traced instruction pointer, you need
>           to use @entry_ip. On the other hand, in the exit_handler, the instruction
> -        pointer of @regs is set to the currect return address.
> +        pointer of @regs is set to the correct return address.
>   
>   Share the callbacks with kprobes
>   ================================
> diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
> --- a/Documentation/trace/ftrace-uses.rst
> +++ b/Documentation/trace/ftrace-uses.rst
> @@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
>   	Not, if this flag is set, then the callback will always be called
>   	with preemption disabled. If it is not set, then it is possible
>   	(but not guaranteed) that the callback will be called in
> -	preemptable context.
> +	preemptible context.
>   
>   FTRACE_OPS_FL_IPMODIFY
>   	Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
> diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
>   kernel is highly latency sensitive.
>   
>   SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
>   and are serviced by BIOS code, usually for "critical" events such as
>   management of thermal sensors and fans. Sometimes though, SMIs are used for
>   other tasks and those tasks can spend an inordinate amount of time in the
> diff -- a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
> --- a/Documentation/trace/rv/runtime-verification.rst
> +++ b/Documentation/trace/rv/runtime-verification.rst
> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>   *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>   system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>   and so on), and the helper functions that glue the monitor to the system via
> -trace, as depicted bellow::
> +trace, as depicted below::
>   
>    Linux   +---- RV Monitor ----------------------------------+ Formal
>     Realm  |                                                  |  Realm
> diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
> --- a/Documentation/trace/uprobetracer.rst
> +++ b/Documentation/trace/uprobetracer.rst
> @@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
>   
>     (\*1) only for return probe.
>     (\*2) this is useful for fetching a field of data structures.
> -  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
> +  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
>           events can access only user-space memory.
>   
>   Types


Reviewed-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>

-Mukesh
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel