Re: [PATCH] fec: convert to gpio descriptor

[Andrew Lunn]

On Thu, Jan 26, 2023 at 02:52:58PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
> 
> The driver can be trivially converted, as it only triggers the gpio
> pin briefly to do a reset, and it already only supports DT.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>  drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++++-------------
>  1 file changed, 11 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 5ff45b1a74a5..dee2890fd702 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -56,7 +56,7 @@
>  #include <linux/fec.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/of_mdio.h>
>  #include <linux/of_net.h>
>  #include <linux/regulator/consumer.h>
> @@ -4035,7 +4035,8 @@ static int fec_enet_init(struct net_device *ndev)
>  #ifdef CONFIG_OF
>  static int fec_reset_phy(struct platform_device *pdev)
>  {
> -	int err, phy_reset;
> +	int err;
> +	struct gpio_desc *phy_reset;
>  	bool active_high = false;
>  	int msec = 1, phy_post_delay = 0;
>  	struct device_node *np = pdev->dev.of_node;

Hi Arnd

netdev drivers are supposed to use 'reverse Christmas tree'. It looks
like this function is actually using 'Christmas tree' :-) Please could
you keep with the current coding style.

> @@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev)
>  	if (!err && msec > 1000)
>  		msec = 1;
>  
> -	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
> -	if (phy_reset == -EPROBE_DEFER)
> -		return phy_reset;
> -	else if (!gpio_is_valid(phy_reset))
> -		return 0;
> -
>  	err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
>  	/* valid reset duration should be less than 1s */
>  	if (!err && phy_post_delay > 1000)
> @@ -4061,11 +4056,13 @@ static int fec_reset_phy(struct platform_device *pdev)
>  
>  	active_high = of_property_read_bool(np, "phy-reset-active-high");
>  
> -	err = devm_gpio_request_one(&pdev->dev, phy_reset,
> -			active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
> -			"phy-reset");
> -	if (err) {
> -		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
> +	phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
> +			active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
> +	if (IS_ERR(phy_reset)) {
> +		err = PTR_ERR(phy_reset);
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev,
> +				"failed to get phy-reset-gpios: %d\n", err);

dev_err_probe() looks usable here.

		Andrew