[PATCH 1/4] drm/vc4: hdmi: Replace hardcoded value by define

From: Maxime Ripard
Date: Thu Jan 26 2023 - 12:10:05 EST


The 120MHz value hardcoded in the call to max_t to compute the HSM rate
is defined in the driver as HSM_MIN_CLOCK_FREQ, let's switch to it so
that it's more readable.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 14628864487a..98fa306dbd24 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1482,7 +1482,9 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
* Additionally, the AXI clock needs to be at least 25% of
* pixel clock, but HSM ends up being the limiting factor.
*/
- hsm_rate = max_t(unsigned long, 120000000, (tmds_char_rate / 100) * 101);
+ hsm_rate = max_t(unsigned long,
+ HSM_MIN_CLOCK_FREQ,
+ (tmds_char_rate / 100) * 101);
ret = clk_set_min_rate(vc4_hdmi->hsm_clock, hsm_rate);
if (ret) {
DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);

--
2.39.1